canning

/kan"ing/, n.

the act, process, or business of preserving cooked food by sealing in cans or jars.

[1870-75, Amer.; CAN² + -ING¹]

* * *

Method of preserving food from spoilage by storing it in containers that are hermetically sealed and then sterilized by heat.

The process was invented in 1809 by Nicolas Appert (b. с 1750

d. 1841) of France, who used glass bottles. In the 19th century tin-coated iron cans with soldered tops, bottoms, and seams were used, but in the early 20th century these were replaced by tin-plated steel containers with interlocking seams and polymer seals. In the later 20th century seamless aluminum cans (punched out from a single sheet) capped with a steel or aluminum lid became common, particularly in the beverage industry. In modern canning, food is passed under hot water or steam, transferred to a sterile container, sealed inside, and subjected to heat sufficient to kill any remaining microorganisms, cooking the food. The process preserves most nutrients but often affects consistency and taste.

* * *

▪ food processing

 method of preserving food from spoilage by storing it in containers that are hermetically sealed and then sterilized by heat. The process was invented after prolonged research by Nicolas Appert (Appert, Nicolas) of France in 1809, in response to a call by his government for a means of preserving food for army and navy use. Appert's method consisted of tightly sealing food inside a bottle or jar, heating it to a certain temperature, and maintaining the heat for a certain period, after which the container was kept sealed until use. It was 50 years before Louis Pasteur (Pasteur, Louis) was able to explain why the food so treated did not spoil: the heat killed the microorganisms in the food, and the sealing kept other microorganisms from entering the jar. In 1810 Peter Durand of England patented the use of tin-coated iron cans instead of bottles, and by 1820 he was supplying canned food to the Royal Navy in large quantities. European canning methods reached the United States soon thereafter, and that country eventually became the world leader in both automated canning processes and total can production. In the late 19th century, Samuel C. Prescott and William Underwood of the United States set canning on a scientific basis by describing specific time-temperature heating requirements for sterilizing canned foods.

      Originally, cans consisted of a sheet of tin-plated iron that was rolled into a cylinder (known as the body), onto which the top and bottom were manually soldered. This form was replaced in the early 20th century by the modern sanitary, or open-top, can, whose constituent parts are joined by interlocking folds that are crimped, or pressed together. Polymer sealing compounds are applied to the end, or lid, seams, and the body seams can be sealed on the outside by soldering. The modern tin can is made of 98.5 percent sheet steel with a thin coating of tin (i.e., tinplate). It is manufactured on wholly automatic lines of machinery at rates of hundreds of cans per minute.

      Most vegetables, fruits, meat and dairy products, and processed foods are stored in tin cans, but soft drinks and many other beverages are now commonly stored in aluminum cans, which are lighter and do not rust. Aluminum cans are made by impact extrusion; the body of the can is punched out in one piece from a single aluminum sheet by a stamping die. This seamless piece, which has a rounded bottom, is then capped with a second piece as its lid. The tabs used in pop-top cans are also made of aluminum. Bimetal cans are made of aluminum bodies and steel lids.

      Canneries are usually located close to the growing areas of the product to be packed, since it is desirable to can foods as quickly as possible after harvesting. The canning process itself consists of several stages: cleaning and further preparing the raw food material; blanching it; filling the containers, usually under a vacuum; closing and sealing the containers; sterilizing the canned products; and labeling and warehousing the finished goods. Cleaning usually involves passing the raw food through tanks of water or under high-pressure water sprays, after which vegetable or other products are cut, peeled, cored, sliced, graded, soaked, pureed, and so on. Almost all vegetables and some fruits require blanching by immersion in hot water or steam; this process softens the vegetable tissues and makes them pliable enough to be packed tightly, while also serving to inactivate enzymes that can cause undesirable changes in the food before canning. Blanching also serves as an additional or final cleansing operation.

      The filling of cans is done automatically by machines; cans are filled with solid contents and, in many cases, with an accompanying liquid (often brine or syrup) in order to replace as much of the air in the can as possible. The filled cans are then passed through a hot-water or steam bath in an exhaust box; this heating expands the food and drives out the remaining air; thus, after sealing, heat sterilizing, and cooling the can, the contraction of the contents produces a partial vacuum within the container. Certain products are vacuum-packed, whereby the cans are mechanically exhausted by specially designed vacuum-can sealing machines.

      Immediately after the cans are exhausted, they are closed and sealed; a machine places the cover on the can, and the curl on the can cover and the flange on the can body are rolled into position and then flattened together. The thin layer of sealing compound originally present in the rim of the cover is dispersed between the layers of metal to ensure a hermetic seal. The sealed cans are then sterilized; i.e., they are heated at temperatures high enough and for a long enough time to destroy all microorganisms (bacteria, molds, yeasts) that might still be present in the food contents. The heating is done in high-pressure steam kettles, or cookers, usually using temperatures around 240° F (116° C). The cans are then cooled in cold water or air, after which they are labeled.

      Canning preserves most of the nutrients in foods. Proteins, carbohydrates, and fats are unaffected, as are vitamins A, C, D, and B₂. The retention of vitamin B₁ depends on the amount of heat used during canning. Some vitamins and minerals may dissolve into the brine or syrup in a can during processing, but they retain their nutritive value if those liquids are consumed.

* * *