hardness tester

▪ device

      device that indicates the hardness of a material, usually by measuring the effect on its surface of a localized penetration by a standardized rounded or pointed indenter of diamond, carbide, or hard steel.

      Brinell hardness is determined by forcing a hardened steel or carbide ball of known diameter under a known load into a surface and measuring the diameter of the indentation with a microscope. The Brinell hardness number is obtained by dividing the load, in kilograms, by the spherical area of the indentation in square millimetres; this area is a function of the ball diameter and the depth of the indentation.

      The Rockwell hardness tester utilizes either a steel ball or a conical diamond known as a brale and indicates hardness by determining the depth of penetration of the indenter under a known load. This depth is relative to the position under a minor initial load; the corresponding hardness number is indicated on a dial. For hardened steel, Rockwell testers with brale indenters are particularly suitable; they are widely used in metalworking plants.

      The Vickers hardness tester uses a square-based diamond pyramid indenter, and the hardness number is equal to the load divided by the product of the lengths of the diagonals of the square impression. Vickers hardness is the most accurate for very hard materials and can be used on thin sheets.

      The Shore scleroscope measures hardness in terms of the elasticity of the material. A diamond-tipped hammer in a graduated glass tube is allowed to fall from a known height on the specimen to be tested, and the hardness number depends on the height to which the hammer rebounds; the harder the material, the higher the rebound. See also Mohs hardness.

* * *