seismic wave

Vibration generated by an earthquake, explosion, or similar phenomenon and propagated within the Earth or along its surface.

Earthquakes generate two principal types of waves: body waves, which travel within the Earth, and surface waves, which travel along the surface. Seismograms (recorded traces of the amplitude and frequency of seismic waves) yield information about the Earth and its subsurface structure; artificially generated seismic waves are used in oil and gas prospecting.

* * *

 vibration generated by an earthquake, explosion, or similar energetic source and propagated within the Earth or along its surface. Earthquakes generate four principal types of elastic waves; two, known as body waves, travel within the Earth, whereas the other two, called surface waves, travel along its surface. Seismographs (seismograph) record the amplitude and frequency of seismic waves and yield information about the Earth and its subsurface structure. Artificially generated seismic waves recorded during seismic surveys (seismic survey) are used to collect data in oil and gas prospecting and engineering.

 Of the body waves, the primary (longitudinal wave), or P, wave has the higher speed of propagation and so reaches a seismic recording station faster than the secondary, or S, wave. P waves, also called compressional or longitudinal waves (longitudinal wave), give the transmitting medium—whether liquid, solid, or gas—a back-and-forth motion in the direction of the path of propagation, thus stretching or compressing the medium as the wave passes any one point in a manner similar to that of sound waves in air. In the Earth, P waves travel at speeds from about 6 km (3.7 miles) per second in surface rock to about 10.4 km (6.5 miles) per second near the Earth's core some 2,900 km (1,800 miles) below the surface. As the waves enter the core, the velocity drops to about 8 km (5 miles) per second. It increases to about 11 km (6.8 miles) per second near the centre of the Earth. The speed increase with depth results from increased hydrostatic pressure as well as from changes in rock composition; in general, the increase causes P waves to travel in curved paths that are concave upward.

 S waves, also called shear or transverse waves (transverse wave), cause points of solid media to move back and forth perpendicular to the direction of propagation; as the wave passes, the medium is sheared first in one direction and then in another. In the Earth the speed of S waves increases from about 3.4 km (2.1 miles) per second at the surface to 7.2 km (4.5 miles) per second near the boundary of the core, which, being liquid, cannot transmit them; indeed, their observed absence is a compelling argument for the liquid nature of the outer core. Like P waves, S waves travel in curved paths that are concave upward.

 Of the two surface seismic waves, Love waves—named after the British seismologist A.E.H. Love (Love, Augustus Edward Hough), who first predicted their existence—travel faster. They are propagated when the solid medium near the surface has varying vertical elastic properties. Displacement of the medium by the wave is entirely perpendicular to the direction of propagation and has no vertical or longitudinal components. The energy of Love waves, like that of other surface waves, spreads from the source in two directions rather than in three, and so these waves produce a strong record at seismic stations even when originating from distant earthquakes.

 The other principal surface waves are called Rayleigh waves after the British physicist Lord Rayleigh (Rayleigh, John William Strutt, 3rd Baron), who first mathematically demonstrated their existence. Rayleigh waves travel along the free surface of an elastic solid such as the Earth. Their motion is a combination of longitudinal compression and dilation that results in an elliptical motion of points on the surface. Of all seismic waves, Rayleigh waves spread out most in time, producing a long wave duration on seismographs.

 

* * *