lacquerwork

Any of a variety of decorative objects or surfaces, usually of wood, to which a coloured, highly polished, and opaque type of varnish called lacquer has been applied.

True lacquerwork is Chinese or Japanese in origin. The technique was copied in Europe, where it was known as "japanning," but European lacquerwork lacks the hardness and brilliance of Asian lacquer. True lacquer is the purified and dehydrated sap of the Rhus vernicifera tree, native to China and cultivated in Japan. Lacquer becomes extremely hard but not brittle on exposure to air and takes a high polish. Many thin layers are applied, allowed to dry, and smoothed before the surface is ready for decoration by carving, engraving, or inlay.

* * *

▪ art

Introduction

      certain metallic and wood objects to which coloured and frequently opaque varnishes called lacquer are applied. The word lacquer is derived from lac, which is the basis of some lacquers. The lacquer of East Asia, China, Japan (arts, East Asian), and Korea should not be confused with other substances to which the term is generally applied; for instance, the lac of Burma, which is the gummy deposit of an insect, Coccus lacca, and the various solutions of gums or resin in turpentine of which European imitations of Eastern lacquer have been and are concocted.

Techniques

Obtaining and preparing lacquer

      Lacquer, as used in China and Japan, is a natural product, the sap of a tree, Rhus vernicifera; subject to the removal of impurities and excess water, it can be used in its natural state, though it was frequently adulterated. The tree, which is indigenous to China and has certainly been cultivated in Japan at least since the 6th century AD, is tapped at about the age of 10 years, when lateral incisions are made in the bark and the running sap is collected during the months of June to September. Branches of a diameter of one inch (about three centimetres) or more are also tapped, the bark having first been removed. Smaller branches are cut off and soaked in water for 10 days, and the sap is collected, producing a lacquer (seshime) of particular quality, used for special purposes. These processes kill the tree, but the wood, when of sufficient size, is of some use for carpentry. From the roots five or six shoots spring up, which become available for the production of lacquer after about six years, and the operation can be thus continued for a considerable length of time before the growth is exhausted. The Chinese and Japanese methods are practically identical in this respect, but the cultivation of the tree does not seem to have been as systematic in China as in Japan.

      The sap is white or grayish in colour and about the consistency of molasses. On exposure to the air it turns yellow-brown and then black. It is strained through hempen cloth to remove physical impurities, after being pounded and stirred in shallow wooden tubs to give it uniform liquidity. It is then slightly heated over a slow fire or in hot sunshine, and stirred again to evaporate excess moisture, and stored in airtight vessels.

      The basis of lacquer ware, both in Japan and in China, is almost always wood, although it was also occasionally applied to porcelain, brass, and white metal alloys. In some instances, objects were carved out of solid lacquer. The wood used, generally a sort of pine having a soft and even grain, was worked to an astonishing thinness. The processes that follow are the result of extraordinary qualities of lacquer itself, which, on exposure to air, takes on an extreme but not brittle hardness and is capable of receiving a brilliant polish of such a nature as to rival even the surface of highly glazed porcelain. Moreover, it has the peculiar characteristic of attaining its maximum hardness in the presence of moisture. To secure this result, the Japanese place the object in a damp box or chamber after each application of lacquer to the basic material (wood, etc.). The Chinese are said (in an account of the industry dating from 1621–28) to use a cave in the ground for this purpose and to place the objects therein at night in order to take advantage of the cool night air. It may, indeed, be said that lacquer dries in a moist atmosphere.

Application

      The joiner's work completed and all knots or projections most carefully smoothed away, cracks and joints are sealed with a mixture of rice paste and seshime lacquer, until an absolutely even surface is obtained. It is then given a thin coat of seshime lacquer to fill up the pores of the wood and to provide a basis for succeeding operations, which may number as many as 20 or 30 or more, of which any one of the following may be taken as typical. On the basis, as above described, is laid a coat of lacquer composition which is allowed to harden and is then ground smooth with whetstone. Next comes a further coat of finer composition, in which is mixed some burnt clay, which is again ground and laid aside to harden for at least 12 hours. On this is fixed a coat of hempen cloth (or, rarely in Japan but more often in China, paper) by means of an adhesive paste of wheat or rice flour and lacquer, which needs 24 hours at least to dry. The cloth is smoothed with a knife and then receives several successive coats of lacquer composition, each demanding the delay necessary for hardening. On this is laid very hard lacquer, requiring a much longer drying interval, afterward being ground to a fine surface. Succeeding coats of lacquer of varying quality are now laid on, dried, and polished.

      This preliminary work, requiring for artistic lacquer at least 18 days, produces the surface on which the artist begins his task of decoration. A large number of processes have been at his command, especially in Japan, but the design was first generally made on paper with lacquer and transferred while still wet or drawn directly with a thin paste of white lead or colour. In carrying it out the artist used gold or silver dust applied through a quill, a bamboo tube, or, for equal distribution, a sieve. Larger fragments of the precious metals were applied separately by hand, with the aid of a small, pointed tool. In one typical instance approximately 500 squares of thin gold foil were thus inserted within one square inch (six square centimetres). These processes each entailed prolonged hardening periods and meticulous polishing. Relief was obtained by modelling with a putty consisting of a mixture of lacquer with fine charcoal, white lead, lampblack, etc., camphor being added to make it work easily. Lacquer was sometimes engraved, both in China and Japan.

Chinese carved lacquer

      The carved lacquer of China (tiao-ch'i), which was imitated but never equalled in Japan (as the Chinese have never reached the perfection of the Japanese gold lacquer ware), needs particular notice. In this the lacquer was built up in the method described above, but to a considerable thickness; when several colours were used, successive layers of each colour of uniform thickness were arranged in the order in which they were to predominate. When the whole mass was complete and homogeneous, it was cut back from the surface to expose each colour as required by the design. When the lacquer was cold and hard, the carving was done with a V-shaped tool kept very sharp. The cutting was done with amazing precision—no correction of faults was possible, for each layer had to be exactly and accurately reached and the final result precisely foreseen from the beginning of the work. The red lacquer (t'i-hung), so well known and justly appreciated, was coloured with cinnabar (red mercuric sulfide). Other colours include a deep and a lighter olive-green, buff, brown, black, and purple (aubergine).

Japanese processes

 In Japanese lacquer, the following are the chief processes used: nashiji (pear skin), small flakes of gold or silver sunk to various depths in the lacquer; fundame, fine gold or silver powder worked to a flat, dull surface; hirame (hirameji), small, irregularly shaped pieces of sheet gold or silver placed on the surface; togidashi (togidashi maki-e), the design built up to the surface in gold, silver, and colours with many coats of lacquer and then polished down to show them (see photograph—>); taka-makie, decoration in bold relief; hiramaki-e, decoration in low relief: rō-iro, polished black; chinkin-bori, engraved lacquer; kirikane, square dice of sheet gold or silver, inserted separately on the surface; and raden, inlaid (inlay) shell and metal. From the earliest recorded times shell was used in the adornment of lacquer in China as well as in Japan, being inlaid on the surface in patterns as well as in small squares like kirikane and dust. For this purpose various shells were used, mother-of-pearl (for larger work), nautilus, pear shell, sea-ear (Haliotes, Japanese Awabi) and Turbo cornutus (Japanese Sazae). For a very charming form, called laque burgauté, the iridescent blue and green shell of the sea-ear was delicately engraved with gold and silver as early as the Ming period (1368–1644) and also in Japan. Chinese lacquer was also inlaid with jade, malachite, coral, soapstone, ivory, porcelain, and other substances.

Historical development

China

 The use of lacquer in China goes back traditionally to legendary times. A late Ming manuscript, the Hsiu shih lu, states that it was first employed for writing on bamboo slips, then for utensils for food, made of black lacquer, and subsequently for vessels for ceremonial use, of black with red interiors (see photograph—>). During the Chou dynasty (Zhou dynasty) (1111–255 BC) it served for the decoration of carriages, harnesses, bows and arrows, etc., and was the subject of official regulations. At this time, gold and colours are said to have come into use. About the 2nd century BC buildings were decorated with lacquer, as were musical instruments. Under the Han dynasty (206 BC–AD 220) further development took place. Pot covers of paper covered with lacquer, found near Port Arthur, are attributed to this period.

      Of the lacquer of the T'ang dynasty (Tang dynasty) (618–907) more reliable information is available, for the collections preserved in the Hōryū-ji (Hōryū Temple) in Japan, founded AD 607, and those assembled by the Japanese emperor Shōmu (724–748), deposited after his death in the Imperial treasury (Shōsō-in) at Nara, contain many objects of Chinese origin; in particular, musical instruments with inlay of cutout figures of gold and silver inserted on the surface, covered with lacquer, which was then rubbed down until the metal ornaments were again visible.

      Under the Sung dynasty (Song dynasty) (960–1279) the industry further developed, and the use of gold and silver lacquer in the utensils made for the palace is particularly recorded. The chief centres of manufacture were Chia-hsing and Su-chou. A lacquer box of the early Sung period, probably once of rhinoceros-horn colour, black and red, with gold dust and silver wire, is one of the very few known examples of the period. Toward the close of the period (c. 1220) it is stated that lacquer wares were exported from Ch'uan-chou, Fukien to Java, India, Persia, Japan, Mecca, and other places. Chinese writers record the existence of carved red lacquer during the time of the Yüan dynasty (Yuan dynasty) (1206–1368) as well as of pierced ware and that inlaid with shell.

      Of the state of the industry under the Ming dynasty (1368–1644) there are contemporary Chinese descriptions; for instance, in the Ko ku yao lun, published in 1388, the Ch'ing pi-ts'ang, published in 1595, and the Hsiu shih lu, which has been handed down in manuscript. This last work was written by a celebrated lacquerer, Huang Ch'eng, and bears a preface by Yang Ming, another lacquerer, dated 1625. The work itself was probably written towards the end of the 16th century. From these works one can ascertain the excellence of the carved lacquer made during the reigns of the Yung-lo (Yongle) (1402–24) and Hsüan-te (1425–35) emperors. Examples of carved lacquer that can be attributed to both these reigns are extant. They are bold in design and free from the superabundance of small detail that characterized later productions; the colour also is generally deeper and richer than that of the 18th-century pieces. In the 16th century there were special factories for carved lacquer at Ta-Li in Yünnan, which also produced spurious imitations. Lacquer with designs painted in gold outlines were made, early in the Ming dynasty, at Nanking and afterward at Peking, and lacquer inlaid with mother-of-pearl was made at Chi-chou in Kiangsi. In the reign of Hsüan-te, lacquer decorated in sprinkled gold was introduced from Japan and excellent copies were made by Chinese lacquerers. Toward the end of the Ming dynasty there was a decline in lacquer manufacture as a result of the troubles accompanying the fall of the last Ming emperor.

      The first and perhaps the greatest of the Manchu (Qing dynasty) emperors, K'ang-hsi (Kangxi) (1661–1722), revived the lacquerwork industry in 1680, when he established a series of 27 workshops for artistic handicrafts in the precincts of the palace at Peking. Carved lacquer was, however, also made at Canton, Su-chou, and Foo-chow; and the Jesuit Louis le Comte, who arrived in China in 1687, gave a good account of the flourishing state of the industry at that time. In this connection it is worth noting that the period of K'ang-hsi was that which saw the first considerable importation of lacquer ware (and other objects of industrial art) into Europe. This led to the development of imitation lacquer applied to furniture and other objects, which were conspicuous features of the chinoiserie craze of the late 17th and 18th centuries. A screen, c. 1700 in the collections of Earl Spencer and R. Freemer Smith, Esq., for example, was made by command of K'ang-hsi for presentation to the Holy Roman emperor Leopold I, whose badge, the double-headed eagle, is incorporated in the design. Carved lacquer of this period, though far from negligible, hardly attains to the rich colour, breadth, and simplicity of that of the Ming period.

      In technique the K'ang-hsi ware shows an advance and is generally free from the small cracks too often found to have developed in the Ming products. The perfection of this quality, apart from other considerations, is found in the lacquer ware of Emperor Ch'ien-lung (Qianlong) (1735–96), a devoted admirer of this art, who employed it on a large scale for the furniture and fittings of his palaces, as well as for ceremonial and commemorative gifts. The workmanship of objects made under his auspices is brilliant in the extreme, but the colour is hard as compared to earlier work, and the design tends to a somewhat stereotyped formalism.

      Still, the 18th century can hardly be called a period of decadence in the decorative arts of China: the superb execution of its productions, a characteristic that commands admiration, redeems it from adverse criticism. The downward course began in the 19th century, with loss of originality and a falling off, due to adulteration, in the quality of the material. What was left of the Imperial factories was burnt in 1869, and, though carved red lacquer was made after that date, the industry had already ceased to have artistic importance.

Japan

      Although the earliest reference to the manufacture of lacquer accepted by all Japanese authorities is a code of law (known as Taihō code) dated 701, there can be no doubt that the manufacture was brought to Japan from China via Korea at the time of the introduction of Buddhism in the middle of the 6th century. At the same time, according to tradition, the Chinese lacquer tree was introduced. The earliest piece of lacquer known today that is accepted as having been made in Japan is the Tamamushi Shrine in the Hōryū-ji (Hōryū Temple), which is attributed to the 7th century. This piece shows strong Korean influence. Many fine pieces of the late 7th and the 8th centuries, inlaid in gold, silver, or mother-of-pearl, of Chinese origin, have been preserved in the Shōsō-in, as already mentioned in the section above on Chinese lacquer. But there is one piece in the Shōsō-in, a sword-scabbard of black lacquer decorated in gold, formerly belonging to the emperor Shōmu (724–748), that is undoubtedly Japanese. This is listed in an old catalog dated 756. There are also two arrows in the Tokyo National Museum that belong to the same period. These can be regarded as the real beginnings of a Japanese style in lacquer.

      The emperor Kammu (781–806) removed the capital from Nara to a new city, Heian-kyō—the modern Kyōto; and an increased luxury in the style of living brought about further developments in the art, especially in the use of gold lacquer, largely because of the spread of Buddhistic influence. This period (Heian period), however, saw the beginnings of a Japanese national style as distinct from the Chinese methods and manner, imported by Buddhist missionaries. Lacquer was used at this time in the decoration of important buildings, and inlay of shell also became popular. The organization of the industry was extended, and, as early as 905, sumptuary edicts began to be issued regulating the dimensions and quantities of material to be used in the domestic utensils—chiefly of black or red polished lacquer—which now began to come into general use. From this time, it is no exaggeration to say that, to a considerable extent, lacquer filled the place occupied in China by ceramic wares. A remarkable development of this period that must not be overlooked was the production of statuary of considerable merit, made with lacquer composition ( kanshitsu), a process derived from China but carried to a high standard in Japan for a brief period, until it was superseded by wood sculpture. Some few authentic examples remain of the fine lacquer of the Heian period, notably a case for Buddhist scriptures in the Ninna-ji at Kyōto, made at the beginning of the 10th century, which bears an inscription dated 919. The case is in black lacquer, sprinkled with gold dust and with a pattern of flowers, clouds, birds, and Buddhist winged genii in gold and silver togidashi.

      During the Kamakura period (1192–1333), in spite of the disturbance caused by the famous struggle between the Minamoto and Taira clans and the establishment of the feudal shogunate at Kamakura, which gives its name to the period, the art of making fine lacquer continued to progress under the patronage of the Fujiwara family, who maintained the Imperial court at Kyōto with ever increasing luxury. Marked features of this time are improved methods of inlay of precious metals and shell and, especially, an attractive form of design in which beautifully written poems are interwoven with the pattern (ashide). The process called Kamakura (Kamakura-bori)-bori, carved wood thickly lacquered with red or black, also dates from this period and continued to flourish for another two centuries or so. During this epoch occurred the beginnings of the characteristic Japanese treatment of landscape and flower subjects in design, generally in flat gold lacquer with nashiji and pewter inlay.

      The Muromachi period (1338–1573) saw a further technical and artistic development, largely under the patronage of the shogun Ashikaga Yoshimasa (reigned 1443–73). He gave great impetus to the tea (tea ceremony) and incense ceremonies, the latter of which brought about a whole series of new applications of the art because of the exquisitely wrought small utensils required by that ritual. The ostentatious simplicity of the Zen sect of Buddhists was displayed in the use of black lacquer of the first quality with little or no ornament. Excellent work in shell inlay was also a characteristic of the time. The gold lacquer of the Muromachi craftsmen gained so great a reputation in China that artisans from that country went to Japan to learn the methods by which it was produced, though they seem to have had little success in introducing it into their own country. Among the leading Japanese craftsmen of the period may be mentioned Kōami Dōchō, Taiami, Seiami, and Igarashi Shinsai, but attribution of specific works to them is largely a matter of conjecture.

      The civil wars which continuously infested Japan during the later Middle Ages checked the growth of the industry for a while, but the short Azuchi-Momoyama period (1574–1600) that followed saw at least the work of one of the greatest of Japanese artists in lacquer, Honami Kōetsu (Hon'ami Kōetsu). He was the founder of a striking and original style of ornament, essentially national in character. His designs were bold and simple in detail, generally executed in high relief with masses of shell or metal inlay. The great feudal lord Toyotomi Hideyoshi (died 1598), who secured the peace of the country with a strong hand, was an enthusiastic patron of the arts, and under his patronage a real revival took place. When he died, his widow erected the Kōdai-ji at Kyōto, in which distinctive lacquer decoration called tata maki-e (Koda-ji maki-e) was used. This temple still contains examples of this ware that were presented by her.

      In 1603 began the rule of the Tokugawa (Tokugawa period) shogunate, which continued without a break until the restoration of the Imperial family to actual power in 1867. The first of the line, Ieyasu (Tokugawa Ieyasu), established at Edo (the modern Tokyo) the great school of lacquer artists that is responsible for almost the whole of the artistic ware known outside Japan. Technical processes were still further developed with additions such as engraved lacquer (chinkinbori) derived from China, carved red and black lacquer from the same source, and the so-called somada ware of shell inlay of black, different in character from the Chinese laque burgauté already mentioned above.

      This period also saw the introduction of the now well-known inrō, or portable medicine case, worn on the girdle and an indispensable addition to the national costume so long as the latter was uncontaminated by Western influence. An inrō consisted, as a rule, of from two to five compartments, beautifully fitted into each other and held together by silken cords running along each side, secured by a bead (ojime) and kept in place on the sash by a kind of toggle (netsuke), sometimes of lacquer but more often of cunningly carved wood, ivory, bone, or other material. On this class of work was lavished some of the finest artistry of the Japanese craftsmen, and the convenient size and intrinsic charm of these dainty utensils (originally, perhaps, made for seals) have caused them to be much favoured by collectors.

      The earlier years of the Tokugawa period saw a considerable Chinese influence in the design of lacquer, especially in inrō; but the work of the greatest Japanese lacquer artists, Ogata Kōrin, followed and extended in the late 17th century the style originated by his master, Kōetsu. Ritsuō and Hanzan in the 18th century maintained this tradition, and a considerable revival of the style took place in the early years of the 19th century, when memorial volumes of the designs of the great master were published. To the latter period belong not a few objects which have been accepted as the original work of Kōrin himself. The more formal school of lacquerers included Kōami Chōgen (1572–1607) and Komo Kitō-ye, who was appointed court lacquer artist to the shogun Iemitsu in 1636 and died in 1674. One of the most important lacquerers of the Kōami family was Kōami Nagashige, whose masterpiece, consisting of three connected cabinets with numerous writing cases, paper cases, and toilet cases, a mirror stand, and other accessories, was completed in 1639. It was made for the dowry of Tokugawa Iemitsu's eldest daughter, on her marriage to Mitsumoto, prince of Bitchū, whose coat of arms is affixed to all the pieces. The lacquer is now in the Tokugawa Art Museum, Nagoya. As did other craftsmen in Japan, lacquer artists followed the practice of transmitting their names to sons or selected pupils. Thus, there were ten generations of the family of Yamamoto Shunshō, who died in 1682, aged 63. The Kajikawa family continued the tradition of its founder well into the 19th century, and the same must be said of Shiomi Masanari in the 18th century, whose work was notable for the quality of the rubbed-down gold and colour lacquer called togidashi.

      The Genroku period (1688–1703) saw, perhaps, the ultimate perfection of style and technique; but the work of the later 18th and, to some extent, of the early 19th centuries has many exquisite qualities. The later periods were characterized by more elaborate detail, but adulteration of the gold with bronze and other metallic powders was often prevalent. A fiery brown tint of the nashiji is a certain mark of quite late date. Nevertheless, there is plenty of good work of the 19th century, and to this period belongs the last of the great artists of the industry, Shibata Zeshin, whose work bears comparison even with some of the greatest of his predecessors, both in technique and in design.

      Modern industrial conditions, however, have practically killed this ancient and beautiful art. It would not have survived so long had not the country been closed to alien influences for two and a half centuries.

Edward Fairbrother Strange

Europe

      Although East Asian objects of art were taken to Europe in considerable quantity during the 16th century, it was not until after 1600 that a real trade with China grew up, fostered by the East India companies of the Netherlands, England, and France. Porcelain and lacquerwork then became so fashionable that European craftsmen undertook to make their own. The secret of porcelain manufacture was discovered shortly after 1700, and by that time the imitation of lacquer had become established in various parts of Europe. Jesuit missionaries had cooperated with scientists and master craftsmen to create formulas, and a small body of writing had appeared, which was to be augmented in the 18th century—the golden age of European lacquer.

      Among the earliest surviving examples of this art is the ballot box of the Saddlers Company. Information on the lacquer process seems first to have been published by the Italian Jesuit Martin Martinius (Novus Atlas Sinensis, 1655). John Stalker and George Parker's Treatise of Japanning and Varnishing (London, 1688) was the first text with pattern illustrations. The English term japanning was inspired by the superiority of Japanese (arts, East Asian) lacquer, which Stalker found “ . . . in fineness of Black, and neatness of draught . . . more beautiful, more rich, or Majestick” than the lacquer of other places, which came to be known as “Indian” or “Bantam” work.

      In France, on the other hand, ouvrage à la Chine was the term for the imitation of lacquer practiced at the Gobelins factory in Paris from 1672. By the end of the century Berlin had become another centre of experimentation, from which a Fleming, Jacques Dagly, brought secrets that were to lead to the 18th-century innovations of the Martin (Martin Family) brothers: Guillaume, Simon, Étienne, Julien, and Robert. They created the lustrous vernis Martin, which was praised by Voltaire. The Martins decorated rooms at Versailles, and Robert's son Jean Alexandre worked for Frederick the Great II at Potsdam. French lacquer was further improved through new information provided by the Mémoire sur le vernis de la Chine, which the French missionary Pierre d'Incarville wrote in 1760 and which appeared as an appendix to L'Art du peintre, doreur, vernisseur of Jean-Félix Watin (1772), the most precise account of lacquerwork that appeared in the 18th century. In this book Watin examined the recipes of his predecessors and recommended the best formulas for lacquering objects to be used indoors, such as furniture, and outdoors, such as carriages. Although nothing could equal the excellence of Oriental resins, he determined that sandarac from Western juniper trees was the best substitute. This, together with various gums dissolved in alcohol and turpentine and mixed with bitumens, produced the different varnishes Watin relied upon. His book gives detailed instruction for preparing the wood, covering it with cloth, varnishing this with from eight to 20 coats, polishing the surface, drawing and painting the designs, and making relief decorations. The best results of this process (e.g., an 18th-century commode attributed to René Dubois) were never as hard and brilliant as real Oriental lacquer, but they provided an admirable substitute; on occasions it is not easy to distinguish them, especially when East Asian designs were imitated.

      The chief interest of European lacquer of the 18th century lies, however, in the fact that it was not a purely imitative art, as it had been at its beginning. Until about 1720, European craftsmen sought to reproduce exactly the figures, the architectural settings, and the stylized vegetable forms of the imported lacquers. Then, in keeping with the playful spirit of the rococo, they modified these designs by introducing European figures, exotic animals such as monkeys, draperies and arabesques, and cartouches and ribbon compositions. Along with this transformation, in place of the conventional black and gold of the Oriental products, came a wide choice of background colours, including scarlet, yellow, white, blue, and green, sometimes flecked with gold. Particularly in Venice, where craftsmen followed the rules of a treatise by Filippo Buonanni (1722), a great originality was achieved by the informal spacing of bouquets of flowers around gracefully posed figures set against delicate hues of yellow and bluish green.

      The uses of lacquer in Europe reflect the changing tastes of the 17th and 18th centuries. In the late 17th century it was principally employed for decorating the cases of cabinets set upon carved Baroque bases or for ornamenting leather wall coverings. In the 18th century, bookcase desks, tall clocks, and tea tables became the most fashionable articles of lacquered furniture in England (United Kingdom) and Germany, while in France and Italy the chest of drawers and corner cabinet were preferred. Whole sets of furniture with Orientalizing lacquer decoration were made in England by Giles Grendey and other cabinetmakers of the Chippendale era (1754–68), many of whose masterpieces are housed in the Victoria and Albert Museum, London. Rooms with lacquered walls have survived at the palaces of Nymphenburg outside Munich, Bamberg, and other German cities. Small lacquered boxes called Boîte de Spa became a specialty of that Belgian town and the nearby centres of Liège and Aachen, where a member of the Dagly family was active.

      In the early 19th century the solemn grandeur of the international Classical style with its insistence on plain wood or gilt surfaces almost eliminated the taste for lacquered furnishings. It survived in Victorian times in the vogue for painted tin or toleware (as in Pontypool, England) and the decoration of small tables and chairs of papier-maché inlaid (inlay) with mother-of-pearl. The making of this furniture, dominated by the London firm of Jennens and Bettridge, rapidly declined after reaching the height of its popularity about the time of the Great Exhibition held in London in 1851. In the period 1925–30, two European sculptors, the Belgian Marcel Wolfers and the Franco-Swiss Jean Dunand, successfully approximated the true Oriental lacquer techniques in a few art objects of clay, wood, and bronze. By this time, however, the making of lacquer surfaces had become a part of the chemical industry, which today produces effects of depth and hard translucence surpassing the finest products of the European lacquer masters of the past.

Robert C. Smith

Additional Reading

European lacquer

Hans Huth, Lacquer of the West: The History of a Craft and an Industry, 1550–1950 (1971), a concise, well-written statement, the most complete to date, based on a life-time study, with many excellent illustrations. Erich Karsten, Lackrohstoff-Tabellen, 7th ed. (1981), a monograph mainly on tables; Lucy Maxym, Russian Lacquer, Legends and Fairy Tales (1981); and Olga Voronova (comp.), Lacquer Miniatures from Mstiora (1980), dealing with original folk miniature painting and the specific techniques developed in Central Russia.

Chinese lacquer

Filippo Bonanni, Trattato sopra la vernice comunemente detta cinese (1720); Pierre d'Incarville, “Mémoire sur le vernis de la Chine,” Mémoires de mathématique et de physique, 3:117–142 (1760); Stephen W. Bushell, Chinese Art, vol. 1 (1904); Edward F. Strange, Catalogue of Chinese Lacquer in the Victoria and Albert Museum (1925) and Chinese Lacquer (1926); R.S. Jenyns, “Chinese Lacquer,” Transactions of the Oriental Ceramic Society, vol. 17 (1939–40); Fritz Low-Beer, “Chinese Lacquer of the Early 15th Century” and “Chinese Lacquer of the Middle and Late Ming Period,” Bulletin of the Museum of Far Eastern Antiquities, no. 22 and 24 (1950–52); Kurt Herberts, Das Buch der ostasiatischen Lackkunst (1959; Eng. trans., Oriental Lacquer, 1962); Werner Speiser, Lackkunst in Ostasien (1965); Harry M. Garner, “Diaper Backgrounds on Chinese Carved Lacquer,” Ars Orientalis, 6:165–190 (1966), and “A Group of Chinese Lacquers with Basketry Panels,” Archives of Asian Art, 20:6–24 (1966–67); Lee Yu-kuan, Oriental Lacquer Art (1972).

Japanese lacquer

Johann J. Rein, Japan, nach Reisen und Studien, vol. 2 (1886; Eng. trans., The Industries of Japan, vol. 2, 1889, reprinted 1969); Michael Tomkinson, A Japanese Collection, 2 vol. (1898); L'Historie de l'art du Japon, Paris Exhibition (1900); Frank Brinkley, Japanese Temples and Their Treasures, 3 vol. (1910); Official Catalogue of the Japan-British Exhibition (1910); Edward F. Strange, “The Incense Ceremony and Its Utensils,” Japan Society Transactions, 21:28–38 (1923–24), and Catalogue of Japanese Lacquer and Inrō in the Victoria and Albert Museum (1924); Martha Boyer, Japanese Export Lacquers from the Seventeenth Century in the National Museum of Denmark (1959); Beatrix von Ragué, Geschichte der japanischen Lackkunst (1967). National Museum of Modern Art, Tokyo, Japanese Lacquer Art: Modern Masterpieces (1982; originally published in Japanese, 1981).

* * *