zinc

—zincky, zincy, zinky, adj. —zincoid, adj.

/zingk/, n., v., zincked or zinced /zingkt/, zincking or zincing /zing"king/.

n.

1. Chem. a ductile, bluish-white metallic element: used in making galvanized iron, brass, and other alloys, and as an element in voltaic cells. Symbol: Zn; at. wt.: 65.37; at. no.: 30; sp. gr.: 7.14 at 20°C.

2. a piece of this metal used as an element in a voltaic cell.

v.t.

3. to coat or cover with zinc.

[1635-45; < G Zink, perh. deriv. of Zinke(n) prong, tine, from the spikelike form it takes in a furnace]

* * *

Metallic chemical element, chemical symbol Zn, atomic number 30.

Zinc is a bluish silver metal, ductile when very pure but brittle otherwise. It forms brass (with copper) and many other alloys. Its major use is in galvanizing iron, steel, and other metals. Zinc is an essential trace element, particularly in red blood cells; in snails, it corresponds to iron in the blood of vertebrates. Zinc oxide is used as a pigment, ultraviolet light absorber (to prevent sunburn), dietary supplement and seed treatment, and photoconductor. Zinc's many other compounds (in which it has valence 2 or, rarely, 1) are used in industrial and consumer applications, including as pesticides, pigments, mordants (see dye), fluxes, and wood preservatives.

* * *

▪ chemical element

Introduction

 chemical element, low-melting metal of Group 12 (IIb, or zinc group (zinc group element)) of the periodic table, essential to life, and one of the most widely used metals. Zinc is of considerable commercial importance.

Occurrence, uses, and properties

      A little more abundant than copper, zinc makes up an average of 65 grams (2.3 ounces) of every ton of the Earth's crust. The chief zinc mineral is the sulfide sphalerite (zincblende), which, together with its oxidation products smithsonite and hemimorphite, constitute nearly all of the world's zinc ore. Native zinc has been reported from Australia, New Zealand, and the United States, but no occurrence is well authenticated. For its mineralogical properties, see native element.

      Zinc is an essential trace element in the human body, where it is found in high concentration in the red blood cells as an essential part of the enzyme carbonic anhydrase, which promotes many reactions relating to carbon dioxide metabolism. The zinc present in the pancreas may aid in the storage of insulin. Zinc is a component of some enzymes that digest protein in the gastrointestinal tract. Zinc deficiency in nut-bearing and fruit trees causes such diseases as pecan rosette, little leaf, and mottle leaf. Zinc functions in the hemosycotypsin of snails (snail)' blood to transport oxygen in a way analogous to iron in the hemoglobin of human blood.

      Metallic zinc is produced by roasting the sulfide ores and then either leaching the oxidized product in sulfuric acid or smelting it in a blast furnace. Zinc is won from the leach solution by electrolysis or is condensed from the blast furnace gas and then distilled of impurities. For specific information on the mining, recovery, and refining of zinc, see zinc processing.

      The major uses of zinc metal are in galvanizing iron and steel against corrosion and in making brasses and alloys for die-casting. Zinc itself forms an impervious coating of its oxide on exposure to the atmosphere, and hence the metal is more resistant to ordinary atmospheres than iron and corrodes at a much lower rate. In addition, because zinc tends to oxidize in preference to iron, some protection is afforded the steel surface even if some of it is exposed through cracks. The zinc coating is formed either by hot-dip galvanizing or electrogalvanizing.

      Hot-dip galvanizing is the most common procedure for coating steel with zinc. This may be a batch process known as general galvanizing or a continuous coating of coils of steel strip. In general galvanizing, steel is pickled in acid, treated with fluxing agents, and then dipped in a bath of molten zinc at about 450° C (840° F). Layers of iron-zinc alloy are formed on the surface and are topped with an outer layer of zinc. Objects so treated range from small nuts and bolts to steel window frames and large girders used in construction. An ordinary grade of zinc containing up to 1.5 percent lead is normally used in this process.

      In electrogalvanizing, zinc is deposited on a steel strop in as many as 20 consecutive electrolytic coating cells. There are several successful cell designs; the simple vertical cell is discussed here to explain the principle. The strip, connected to the negative side of a direct current through large-diameter conductor rolls located above and between two cells, is dipped into a tank of electrolyte by a submerged sink roll. Partially submerged anodes, opposing the strip, are connected to the positive side of the electric current by heavy bus bars. Zinc cations (i.e., positively charged zinc atoms) present in the electrolyte are converted by the current into regular zinc atoms, which deposit on the strip. The bath is supplied with zinc cations either by zinc anodes, which are continuously dissolved by the direct current, or by zinc compounds continuously added to the electrolyte. In the latter case the anodes are made of insoluble materials, such as titanium coated with iridium oxide. The electrolyte is an acidic solution of zinc sulfide or zinc chloride with other bath additions to improve the quality of the coating and the current efficiency. Coating thickness is easier to control than in the hot-dip process because of the good relationship between electrical current and deposited zinc.

      The negative electrode (outside can) in one common type of electric dry cell is composed of zinc. Another important series of alloys are those formed by the addition of 4 to 5 percent aluminum to zinc; these have a relatively low melting point but possess good mechanical properties and can be cast under pressure in steel dies. Considerable quantities of zinc in the rolled form are used for roofing, particularly in Europe; small additions of copper and titanium improve creep resistance—i.e., resistance to gradual deformation.

      Freshly cast zinc has a bluish silver surface but slowly oxidizes in air to form a grayish protective oxide film. Highly pure zinc (99.99 percent) is ductile; the so-called prime western grade (99.8 percent pure) is brittle when cold but above 100° C (212° F) can be rolled into sheets that remain flexible. Zinc crystallizes in the hexagonal close-packed structure. When iron and zinc together are exposed to a corrosive medium, they constitute an electrolytic cell, and the zinc is attacked (oxidized to the Zn²⁺ ion) preferentially because of its higher electrode potential. This so-called sacrificial protection, coupled with the much greater corrosion resistance of zinc under atmospheric conditions, is the basis for galvanizing.

      Natural zinc is a mixture of five stable isotopes: ⁶⁴Zn (48.6 percent), ⁶⁶Zn (27.9 percent), ⁶⁷Zn (4.1 percent), ⁶⁸Zn (18.8 percent), and ⁷⁰Zn (0.6 percent).

History

      Metallic zinc appeared much later in history than the other common metals. Copper, lead, tin, and iron can be obtained as the molten metals by heating their oxide ores with charcoal (carbon), a process called reduction, in shaft furnaces, which were developed quite early in history. Zinc oxide, however, cannot be reduced by carbon until temperatures are reached well above the relatively low boiling point of the metal (907 °C). Thus, the furnaces developed to smelt the other metals could not produce zinc. Small quantities of metallic zinc can sometimes be found in the flues of lead blast furnaces.

      There is some evidence that the Greeks knew of the existence of zinc and called it pseudargyras, or “false silver,” but they had no method of producing it in quantity. The Romans as early as 200 BC produced considerable quantities of brass, an alloy of zinc and copper, by heating in crucibles a mixture of zinc oxide and charcoal covered with lumps of metallic copper. The zinc oxide was reduced in the lower part of the crucible. Zinc vapour was formed and dissolved in the copper to form brass. At the end of the process the temperature was raised to melt the brass for casting into ingots. Brass production was the Romans' only use of zinc.

      The realization that to make zinc it was necessary to produce the metal as a vapour and then condense it seems first to have been reached in India in the 13th or 14th century. The metallurgists of China had achieved large-scale production of zinc by the 16th century. In the West this principle was first applied in England in 1743 under the leadership of William Champion. At the end of the 18th century in Belgium and Poland improvements were made in the furnace, and the process remained unchanged until an electrolytic process was developed in 1917. At the end of the 1920s a radical advance was made in the United States by developing a continuous retort process, and during the 1930s an electrothermic process was designed for producing zinc continuously. A development of the 1960s was the zinc-lead blast furnace, in which rapid quenching of the gases is a key principle. Zinc production processes are treated in detail in zinc processing.

Compounds

      In chemical compounds, zinc exhibits almost exclusively a +2 oxidation state. A few compounds of zinc in the +1 state have been reported, but never any compounds of zinc in the +3 state or higher.

      Zinc oxide, ZnO, is one of the most important zinc compounds. It can be prepared in a state of high purity and in a variety of crystal shapes and sizes by burning zinc vapour in air. Because of its high heat conductivity and capacity, zinc oxide is frequently incorporated into rubber as a heat dissipater. In the crystal of zinc oxide, the lattice (i.e., the orderly structure formed by the ions) is an open one in which the zinc and oxygen ions occupy only 44 percent of the volume. Defects can be created in the lattice by specific treatments such as the introduction of foreign atoms or of zinc atoms in the vacancies of the lattice. Such treatment of zinc oxide crystals produces various electrical, photoelectrical, and catalytic properties. As a result, zinc oxide is used as a semiconductor in the production of phosphors for television tubes and fluorescent lamps. Its effects on the reactivity of many compounds make it useful as a catalyst in such operations as the manufacture of synthetic rubber and methanol. It is also used in paints, cosmetics, plastics, pharmaceuticals, and printing inks. Because under the influence of light the electrical conductivity of zinc oxide can be increased many times, it is employed in certain photocopying processes.

      Zinc sulfate, ZnSO₄, is an intermediate compound in the production of zinc from its ores by the electrolytic process. It is used as a weed killer, in the manufacture of viscose rayon, and in dyeing, in which it functions as a mordant. Zinc chloride, ZnCl₂, can be prepared by a direct reaction or by evaporating the aqueous solution formed in various reactions. It is strongly deliquescent (water-absorbing) and is utilized as a drying agent and as a flux. In aqueous solution it is used as a wood preservative. Zinc sulfide, ZnS, occurs in nature as the mineral sphalerite and may be prepared by treating solutions of zinc salts with hydrogen sulfide. It was long used as a white pigment but has been gradually replaced by titanium dioxide. Zinc sulfide has luminescent properties when activated by the addition of small quantities of copper, manganese, silver, or arsenic and so has been used in X-ray screens, in luminous dials for clocks and watches, and in fluorescent lights.

atomic number

30

atomic weight

65.39

melting point

420° C (788° F)

boiling point

907° C (1,665° F)

density

7.133 g/cm³ (25° C)

oxidation state

+2

electronic config.

[Ar]3d¹⁰4s²

* * *