fusion reactor

fusion reactor
Physics. a reactor for producing atomic energy by nuclear fusion. Cf. reactor (def. 4).

* * *

Introduction
also called  fusion power plant  or  thermonuclear reactor 
 a device to produce electrical power from the energy released in a nuclear fusion reaction.

      Since the 1930s, scientists have known that the Sun and other stars generate their energy by nuclear fusion. They realized that if fusion energy generation could be replicated in a controlled manner on Earth, it might very well provide a safe, clean, and inexhaustible source of energy. The 1950s saw the beginning of a worldwide research effort to develop a fusion reactor. The substantial accomplishments and prospects of this continuing endeavour are described in this article.

General characteristics
      The energy-producing mechanism in a fusion reactor is the joining together of two light atomic nuclei. When two nuclei fuse, a small amount of mass is converted into a large amount of energy. Energy (E) and mass (m) are related through Einstein's relation, E = mc2, by the large conversion factor c2, where c is the speed of light (electromagnetic radiation) (about 3 × 108 metres per second, or 186,000 miles per second). Mass can be converted to energy also by nuclear fission, the splitting of a heavy nucleus. This splitting process is utilized in nuclear reactors (nuclear reactor).

      Fusion reactions are inhibited by the electrical repulsive force, called the Coulomb force, that acts between two positively charged nuclei. For fusion to occur, the two nuclei must approach each other at high speed in order to overcome their electrical repulsion and attain a sufficiently small separation (less than one-trillionth of a centimetre) so that the short-range strong force dominates. For the production of useful amounts of energy, a large number of nuclei must undergo fusion; that is to say, a gas of fusing nuclei must be produced. In a gas at extremely high temperatures, the average nucleus contains sufficient kinetic energy to undergo fusion. Such a medium can be produced by heating an ordinary gas beyond the temperature at which electrons are knocked out of their atoms. The result is an ionized gas consisting of free negative electrons and positive nuclei. This ionized gas is in a plasma state, the fourth state of matter. Most of the matter in the universe is in the plasma state.

      At the core of experimental fusion reactors is a high-temperature plasma. Fusion occurs between the nuclei, with the electrons present only to maintain macroscopic charge neutrality. The temperature of the plasma is about 100,000,000 kelvins (K; about 100,000,000 °C, or 180,000,000 °F), which is more than six times the temperature at the centre of the Sun. (Higher temperatures are required for the lower pressures and densities encountered in fusion reactors.) A plasma loses energy through processes such as radiation, conduction, and convection, so sustaining a hot plasma requires that fusion reactions add enough energy to balance the energy losses. In order to achieve this balance, the product of the plasma's density and its energy confinement time (the time it takes the plasma to lose its energy if unreplaced) must exceed a critical value.

      Stars, including the Sun, consist of plasmas that generate energy by fusion reactions. In these natural fusion reactors, plasma is confined at high pressures by the immense gravitational field. It is not possible to assemble on Earth a plasma sufficiently massive to be gravitationally confined. For terrestrial applications, there are two main approaches to controlled fusion—namely, magnetic confinement and inertial confinement.

      In magnetic confinement a low-density plasma is confined for a long period of time by a magnetic field. The plasma density is roughly 1021 particles per cubic metre, which is many thousands of times less than the density of air at room temperature. The energy confinement time must then be at least one second—i.e., the energy in the plasma must be replaced every second.

      In inertial confinement no attempt is made to confine the plasma beyond the time it takes the plasma to disassemble. The energy confinement time is simply the time it takes the fusing plasma to expand. Confined only by its own inertia, the plasma survives for only about one-billionth of a second (one nanosecond). Hence, breakeven in this scheme requires a very large particle density, typically about 1030 particles per cubic metre, which is about 100 times the density of a liquid. A thermonuclear bomb is an example of an inertially confined plasma. In an inertial confinement power plant, the extreme density is achieved by compressing a millimetre-scale solid pellet of fuel with lasers (laser) or particle beams. These approaches are sometimes referred to as laser fusion or particle-beam fusion.

      The fusion reaction least difficult to achieve combines a deuteron (the nucleus of a deuterium atom) with a triton (the nucleus of a tritium atom). Both nuclei are isotopes of the hydrogen nucleus and contain a single unit of positive electric charge. Deuterium-tritium (D-T) fusion thus requires the nuclei to have lower kinetic energy than is needed for the fusion of more highly charged, heavier nuclei. The two products of the reaction are an alpha particle (the nucleus of a helium atom) at an energy of 3.5 million electron volts (electron volt) (MeV) and a neutron at an energy of 14.1 MeV (1 MeV is the energy equivalent of a temperature of about 10,000,000,000 K). The neutron, lacking electric charge, is not affected by electric or magnetic fields and can escape the plasma to deposit its energy in a surrounding material, such as lithium. The heat generated in the lithium “blanket” can then be converted to electrical energy by conventional means, such as steam-driven turbines (turbine). The electrically charged alpha particles, meanwhile, collide with the deuterons and tritons (by their electrical interaction) and can be magnetically confined within the plasma, thereby transferring their energy to the reacting nuclei. When this redeposition of the fusion energy into the plasma exceeds the power lost from the plasma, the plasma will be self-sustaining, or “ignited.”

      Although tritium does not occur naturally, tritons and alpha particles are produced when neutrons from the D-T fusion reactions are captured in the surrounding lithium blanket. The tritons are then fed back into the plasma. In this respect, D-T fusion reactors are unique as they use their waste (neutrons) to generate more fuel. Overall, a D-T fusion reactor uses deuterium and lithium as fuel and generates helium as a reaction by-product. Deuterium can be readily obtained from seawater—about one in every 3,000 water molecules contains a deuterium atom. Lithium is also abundant and inexpensive. In fact, there is enough deuterium and lithium in the oceans to provide for the world's energy needs for billions of years. With deuterium and lithium as the fuel, a D-T fusion reactor would be an effectively inexhaustible source of energy.

      A practical fusion reactor would also have several attractive safety and environmental features. First, a fusion reactor would not release the pollutants that accompany the combustion of fossil fuels (fossil fuel)—in particular, the gases that contribute to global warming. Second, because the fusion reaction is not a chain reaction, a fusion reactor cannot undergo a runaway chain reaction, or “meltdown,” as can happen in a fission reactor. The fusion reaction requires a confined hot plasma, and any interruption of a plasma control system would extinguish the plasma and terminate fusion. Third, the main products of a fusion reaction (helium atoms) are not radioactive. Although some radioactive by-products are produced by the absorption of neutrons in the surrounding material, low-activation materials exist such that these by-products have much shorter half-lives (half-life) and are less toxic than the waste products of a nuclear reactor. Examples of such low-activation materials include special steels or ceramic composites (e.g., silicon carbide).

Principles of magnetic confinement

Confinement physics
      Magnetic confinement of plasmas is the most highly developed approach to controlled fusion. A large part of the problem of fusion has been the attainment of magnetic field configurations that effectively confine the plasma. A successful configuration must meet three criteria: (1) the plasma must be in a time-independent equilibrium state, (2) the equilibrium must be macroscopically stable, and (3) the leakage of plasma energy to the bounding wall must be small.

      Charged particles tend to spiral about a magnetic line of force. It is necessary that these particle trajectories do not intersect the bounding wall. Simultaneously, the thermal energy of all the particles exerts an expansive pressure force on the plasma. For the plasma to be in equilibrium, the magnetic force acting on the electric current within the plasma must balance the pressure force at every point in the plasma.

      This equilibrium must be stable, which is to say that the plasma will return to its original state following any small perturbation, such as continual random thermal “noise” fluctuations. In contrast, an unstable plasma would likely depart from its equilibrium state and rapidly (perhaps in less than one-thousandth of a second) escape the confining magnetic field following any small perturbation.

      A plasma in stable equilibrium can be maintained indefinitely if the leakage of energy from the plasma is balanced by energy input. If the plasma energy loss is too large, then ignition cannot be achieved. An unavoidable diffusion of energy across the magnetic field lines will occur from the collisions between the particles. The net effect is to transport energy from the hot core to the wall. In theory, this transport process, known as classical diffusion, is not strong in hot fusion plasmas and can be compensated by heat from the alpha particle fusion products. In experiments, however, energy is lost from the plasma at 10 to 100 times that expected from classical diffusion theory. Solution of the anomalous transport problem involves research into fundamental topics in plasma physics, such as plasma turbulence.

      Many different types of magnetic configurations for plasma confinement have been devised and tested over the years. These may be grouped into two classes: closed, toroidal configurations and open, linear configurations. Toroidal devices are the most highly developed. In a simple straight magnetic field, the plasma would be free to stream out the ends. End loss can be eliminated by forming the plasma and field in the closed shape of a doughnut, or torus, or, in an approach called mirror confinement, by “plugging” the ends of such a device magnetically and electrostatically.

Toroidal confinement
 The most extensively investigated toroidal confinement concept is the tokamak. The tokamak (an acronym derived from the Russian words for “toroidal magnetic confinement”) was introduced in the mid-1960s by Soviet plasma physicists. The magnetic lines of force are helixes that spiral around the torus. The helical magnetic field has two components: (1) a toroidal component, which points the long way around the torus, and (2) a poloidal component directed the short way around the machine. Both components are necessary for the plasma to be in stable equilibrium. If the poloidal field were zero, so that the field lines were simply circles wrapped about the torus, then the plasma would not be in equilibrium. The particles would not strictly follow the field lines but would drift to the walls. The addition of the poloidal field provides particle orbits that are contained within the device. If the toroidal field were zero, so that the magnetic field lines were directed only the short way around the torus, the plasma would be in equilibrium, but it would be unstable. The plasma column would develop growing distortions, or kinks, which would carry the plasma into the wall.

      The toroidal field is produced by coils that surround the toroidal vacuum chamber containing the plasma. (The plasma must be situated within an evacuated chamber to prevent it from being cooled by interactions with air molecules.) In order to minimize power losses in the coils, designs involving superconducting coils have begun to replace copper coils. The plasma in a tokamak fusion reactor would have a major diameter in the range of 10 metres (33 feet) and a minor diameter of roughly 2 to 3 metres. The plasma current would likely be on the order of tens of millions of amperes, and the flex density of the toroidal magnetic field would measure several teslas. In order to help guide research and development, scientists frequently perform conceptual designs of fusion reactors. This device in theory would generate 1 gigawatt (1 billion watts) of electric power—sufficient to meet the electricity needs of a large city.

      The poloidal field is generated by a toroidal electric current that is forced to flow within the conducting plasma. Faraday's law of induction (electromagnetism) can be used to initiate and build up the current. A solenoid located in the hole of the torus can be used to generate magnetic flux that increases over time. The time-varying flux induces a toroidal electric field that drives the plasma current. This technique efficiently drives a pulsed plasma current. However, it cannot be used for a steady-state current, which would require a magnetic flux increasing indefinitely over time. Unfortunately, a pulsed reactor would suffer from many engineering problems, such as materials fatigue, and thus other methods have been developed to drive a steady-state current to produce the poloidal magnetic field.

      A technique known as radio-frequency (RF) current drive employs electromagnetic radiation to generate a steady-state current. Electromagnetic waves are injected into the plasma so that they propagate within the plasma in one direction around the torus. The speed of the waves is chosen to equal roughly the average speed of the electrons in the plasma. The wave electric field (which in a plasma has a component along its direction of travel) can then continuously accelerate the electrons as the wave and particles move together around the torus. The electrons develop a net motion, or current, in one direction.

      Another established current-drive technique is neutral-beam current drive. A beam of high-energy neutral atoms is injected into the plasma along the toroidal direction. The neutral beam will freely enter the plasma since it is unaffected by the magnetic field. The neutral atoms become ionized by collisions with the electrons. The beam then consists of energetic positively charged nuclei that are confined within the plasma by the magnetic field. The high-speed ions travel toroidally along the magnetic field and collide with the electrons, pushing them in one direction and thereby producing a current.

      Both RF and neutral-beam current-drive techniques have a low efficiency (i.e., they require a large amount of power to drive the plasma current). Fortunately, a remarkable effect occurs in tokamak plasmas that reduces the need for external current drive. If the plasma pressure is greater in the core than at the edge, this pressure differential spontaneously drives a toroidal current in the plasma. This current is called the bootstrap current. It can be considered a type of thermoelectric effect, but its origin is in the complex particle dynamics that arise in a toroidal plasma. It has been observed in experiments and is now included routinely in advanced experiments and in tokamak reactor designs.

      Other toroidal confinement concepts that offer potential advantages over the tokamak are being developed. Three such alternatives are the stellarator, reversed-field pinch (RFP), and compact torus concepts. The stellarator and RFP are much like the tokamak. In the stellarator the magnetic field is produced by external coils only. Thus, the plasma current is essentially zero, and the problems inherent in sustaining a large plasma current are absent. The RFP differs from the tokamak in that it operates with a weak toroidal magnetic field. This results in a compact, high-power-density reactor with copper (instead of superconducting) coils. Compact tori are toroidal plasmas with no hole in the centre of the torus. Reactors based on compact tori are small and avoid the engineering complications of coils linking the plasma torus.

Mirror confinement
      An alternative approach to magnetic confinement is to employ a straight configuration in which the end loss is reduced by a combination of magnetic and electric plugging. In such a linear fusion reactor the magnetic (magnetic mirror) field strength is increased at the ends. Charged particles that approach the end slow down, and many are reflected from this “magnetic mirror.” (The same magnetic reflection mechanism traps particles in the Earth's magnetosphere, specifically in the Van Allen radiation belts (Van Allen radiation belt).) Unfortunately, particles with extremely high speed along the field are not stopped by the mirror. To inhibit this leakage, electrostatic plugging is provided. An additional section of plasma is added at each end beyond the magnetic mirror. The plasma in these “end plugs” produces an electrostatic potential barrier to nuclei. The overall configuration is called a tandem mirror.

Plasma heating
      A plasma needs to be heated to about 100,000,000 K for fusion reactions to take place. Two plasma-heating methods have been highly developed: electromagnetic wave heating and neutral-beam injection heating. In the former, electromagnetic waves are directed by antennas at the surface of the plasma. The waves penetrate the plasma and transfer their energy to the constituent particles. Ionized gases can support the propagation of a remarkably large variety of waves not found in other forms of matter. Effective wave-heating techniques employ frequencies from the radio-frequency range to the microwave range. Power absorption often relies upon a resonant interaction between the wave and plasma. For example, if the frequency of the electromagnetic wave is equal to the frequency at which a nucleus gyrates about a magnetic field line, this resonant nucleus absorbs energy from the wave. This technique is called ion cyclotron resonance heating. Similarly, electron cyclotron resonance heating may be used to heat electrons. Such electron heating requires very high frequencies (tens to hundreds of gigahertz), such as produced by free-electron lasers and gyrotron tubes.

      In the second method, beams of neutral atoms at high energy (up to about one million electron volts) are injected into the plasma, rather as in the neutral-beam current drive described above. When used for heating, however, the beams are injected in both directions around the torus, so that no net momentum is imparted to the plasma. The slowing down, or transfer of beam energy to the plasma, constitutes the heating mechanism.

Principles of inertial confinement
 In an inertial confinement fusion (ICF) reactor, a tiny solid pellet of fuel—such as deuterium-tritium (D-T)—would be compressed to tremendous density and temperature so that fusion power is produced in the few nanoseconds before the pellet blows apart. The compression is accomplished by focusing an intense laser beam or a charged particle beam, referred to as the driver, upon the small pellet (typically 1 to 10 mm in diameter). For efficient thermonuclear burn, the time allotted for the pellet to burn must be less than the disassembly time. This means that, in the compressed state, the product of the pellet mass density and the pellet radius must exceed about 3 grams per square centimetre. A high mass density will hasten the burn, and a large radius will slow the disassembly time. The ratio of fusion energy produced in the pellet explosion to the driver energy is called the pellet gain. High pellet gains of 100 or more are required for an ICF reactor.

      Pellets are multilayered, consisting of several concentric spheres. The surface of the pellet is ionized by the driver beam, and ablation of the ionized material generates a large inward force on the pellet. Recoil from the ablation implodes the inner layer, producing a shock wave that compresses the inner layers of the D-T fuel. The implosion speed is several hundred kilometres per second, produced by a force equivalent to some 10 billion atmospheres. The target layers are designed such that the laser or particle-beam energy provides compression, not heat (entropy), during this stage. At the final stage of compression, the pellet is compressed to 1,000 to 10,000 times the density of typical solids.

      In conventional ICF (usually referred to as shock-heated ICF), the laser or particle-beam energy pulses are accurately set such that the shocks produced during the implosion phase converge in the centre of the pellet, heating it to fusion temperatures. The burn initiates in the central D-T layer and spreads outward as the alpha particles collide with and heat the rest of the pellet to a value sufficient to produce fusion reactions. Ignition occurs, and the pellet, now a dense plasma, is burned up in a small microexplosion. An alternative method for ICF, known as fast ignition, has emerged in recent years because of rapid progress in generating intense picosecond (10−12 second) laser systems. Fast ignition can reduce the driver energy considerably. In this scheme, the main laser or particle beam is used to compress the fuel similar to shock heating. Then a short, intense laser pulse heats a small portion of the compressed fuel to fusion temperature, initiating the fusion burn. This approach may lead to target gains that are 3 to 10 times larger than in shock heating.

      It is essential that the implosion of the outer layer of the target be symmetric and uniform to a high degree of accuracy. Any asymmetry can grow during compression, and, more important, the shocks may not precisely converge on the centre, which would prevent ignition of the fuel. Thus, the pellet must be manufactured with a high degree of smoothness, with tolerances of less than a thousandth of a millimetre. The driver should also deposit its energy on the pellet uniformly, with a variation of less than 1 percent. There are two methods to achieve this uniformity. In the first method, known as indirect drive, the pellet is located inside a hollow cylindrical shell known as a hohlraum, and the driver is aimed at the walls of the hohlraum. The hohlraum absorbs the driver's energy and then radiates the target with intense X-rays (X-ray), which cause the pellet to heat and implode. Because a hohlraum is effectively a resonant cavity, the X-ray intensity on the target will be quite uniform even if few driver beams are used. The drawback of this technique is that the target gain is reduced because of inefficiency in converting the driver energy to X-rays. A higher gain is seen in the second method, known as direct drive, but here the driver system is much more complex, as many driver beams and special optical elements are needed to achieve the necessary uniform delivery of energy to the target.

Development of fusion reactor technology

Magnetic confinement
      Several decades of fusion research have produced accomplishments of two types. First, the discipline of plasma physics has developed to the point that theoretical and experimental tools permit quantitative evaluation of many aspects of fusion reactor concepts. Second, and perhaps most revealing, the evolutionary improvement of plasma parameters has placed experiments at the threshold of energy breakeven, in which energy input to the plasma is equal to fusion energy produced.

      Fusion research experiments are performed with hydrogen or deuterium plasmas in most cases. For years, radioactive tritium was not added, because remote-handling requirements complicated the experiments. However, in 1991 the first tritium-deuterium reaction was carried out. The “burn” lasted for two seconds and released a record amount of energy, approximately 20 times that released in deuterium-deuterium experiments.

      A figure of merit with which to judge the plasma quality is the energy gain Q that would occur if the plasma contained tritium. From 1965 to 1995, Q increased from 10−7 to 1 (breakeven).

      A wide variety of plasma experiments have been performed to investigate many aspects of the fusion problem. Performances closest to the level of a practical fusion reactor have been attained in three flagship experiments in Europe, Japan, and the United States. These large tokamak facilities are the Joint European Torus (JET), a multinational western European venture operated in England; the Tokamak-60 (JT-60) of the Japan Atomic Energy Research Institute; and the Tokamak Fusion Test Reactor (TFTR) at the Princeton (Princeton University) Plasma Physics Laboratory in New Jersey, respectively.

      In 1994 a major milestone was achieved when the TFTR generated 10 megawatts of fusion power. Up to that time, almost all fusion experiments had been operated with hydrogen or deuterium plasmas. TFTR was fueled with a mixture of deuterium and tritium. Experimentation with fusing plasmas is critical to establish the effect of the fusion reactions (and the high-energy alpha particles (alpha particle) that they produce) on plasma behaviour. In 1997, JET generated 16 megawatts of peak power with a fusion gain (the ratio of fusion power produced to the net input power) of 0.6.

      A next major step in the development of fusion power is the construction of a facility to study the physics of a burning, ignited plasma (with Q being infinite). The presence of alpha particles can alter the behaviour of the plasma in ways not easily simulated in nonburning plasmas. It is anticipated that this will occur in a planned new experiment, the International Thermonuclear Experimental Reactor (ITER) to be constructed at Cadarache, France. This is a very large experiment that will investigate both the physics of an ignited plasma and reactor technology. The large cost of the device has encouraged international collaboration in its design and funding, with participation from the European Union, Japan, China, India, South Korea, Russia, and the United States.

      With the tremendous advances in scientific understanding and plasma quality, questions regarding the engineering and economic attractiveness of the tokamak concept have received greater attention. Materials development is required. For example, the wall exposed to the plasma must survive intense neutron bombardment. The optimal path to fusion energy production involves some balance between further upscaling of the current tokamak concept toward reactor parameters and improvement of the magnetic confinement concept. Improvements can accrue from enhanced scientific understanding through research and by the development of alternative, non-tokamak concepts, as well as improvements to the tokamak. A significant thrust in tokamak research is to develop more-compact tokamaks with higher plasma pressure. Such advanced tokamaks are expected to be more economical.

Inertial confinement
      ICF research has followed an evolutionary path similar to that of magnetic fusion. In the laser fusion approach, densities ranging from 100 to 200 times liquid deuterium-tritium density have been achieved. For example, at the Lawrence Livermore National Laboratory in California, a product of density and energy-confinement time of 5 × 1014 seconds per cubic centimetre has been achieved employing the world's largest and most powerful laser, the Nova laser. (The Nova is a 10-beam neodymium-glass laser operated at an energy level of 40,000 joules in a one-nanosecond pulse.) Although the value of this product is comparable to that representing breakeven for magnetic fusion, laser fusion requires a larger value to overcome the rather poor efficiency of existing lasers.

 As a result of such progress, the National Ignition Facility, a laser fusion experiment that will achieve ignition, has been constructed in the United States. However, this facility, also located at Livermore, is funded primarily for its application to weapons research, not energy research.

      In both the magnetic and inertial confinement programs, the experimental steps become more expensive as the reactor regime is approached. At the same time, basic research and innovation are needed to enhance the attractiveness of the reactor concepts. Significant wisdom is required to balance these needs and to build effectively upon the impressive results to date so that nuclear fusion can indeed become a major factor in meeting the world's ever-growing energy needs.

Stewart C. Prager Farrokh Najmabadi

Additional Reading
Stanley W. Angrist, Direct Energy Conversion, 4th ed. (1987), provides a historical introduction and overview. Articles written for the lay reader include two from Scientific American: Robert W. Conn, “The Engineering of Magnetic Fusion Reactors,” 249(4):60–71 (October 1983); and R. Stephen Craxton, Robert L. McCrory, and John M. Soures, “Progress in Laser Fusion,” 255(2):68–79 (August 1986). The following books assume that the reader has a science background. Concepts of fusion in general are examined by Thomas James Dolan, Fusion Research: Principles, Experiments, and Technology (1982). Francis F. Chen, Introduction to Plasma Physics and Controlled Fusion, vol. 1, Plasma Physics, 2nd ed. (1984); and Weston M. Stacey, Jr., Fusion Plasma Analysis (1981), provide introductions to plasma physics. Particular approaches to fusion are analyzed in James J. Duderstadt and Gregory A. Moses, Inertial Confinement Fusion (1982); two articles from Physics Today, vol. 45, no. 9 (September 1992): John D. Lindl, Robert L. McCrory, and E. Michael Campbell, “Progress Toward Ignition and Burn Propagation in Inertial Confinement Fusion,” pp. 32–40; and William J. Hogan, Roger Bangerter, and Gerald L. Kulcinski, “Energy from Inertial Fusion,” pp. 42–50; Weston M. Stacey, Jr., Fusion: An Introduction to the Physics and Technology of Magnetic Confinement Fusion (1984); and two articles from Physics Today, vol. 45, no. 1 (January 1992): J. Geoffrey Cordey, Robert J. Goldston, and Ronald R. Parker, “Progress Toward a Tokamak Fusion Reactor,” pp. 22–30; and James D. Callen, Benjamin A. Carreras, and Ronald D. Stambaugh, “Stability and Transport Processes in Tokamak Plasmas,” pp. 34–42.Stewart C. Prager

* * *


Universalium. 2010.

Игры ⚽ Поможем сделать НИР

Look at other dictionaries:

  • Fusion reactor — См. Термоядерный реактор Термины атомной энергетики. Концерн Росэнергоатом, 2010 …   Термины атомной энергетики

  • fusion reactor — noun a nuclear reactor that uses controlled nuclear fusion to generate energy • Syn: ↑thermonuclear reactor • Hypernyms: ↑nuclear reactor, ↑reactor * * * Physics. a reactor for producing atomic energy by nuclear fusion. Cf. reactor (def. 4). * *… …   Useful english dictionary

  • fusion reactor — branduolių sintezės reaktorius statusas T sritis radioelektronika atitikmenys: angl. fusion reactor vok. Fusionsreaktor, m rus. реактор синтеза ядер, m pranc. réacteur à fusion, m …   Radioelektronikos terminų žodynas

  • fusion reactor — noun (theoretically), a thermonuclear reactor that relies on the controlled fusion of light elements into heavier elements, with the attendant release of enormous amounts of energy. In practice, satisfactory results have not yet been achieved …   Wiktionary

  • fusion reactor — /ˈfjuʒən riæktə/ (say fyoohzhuhn reeaktuh) noun a nuclear reactor in which fusion (def. 5) takes place …  

  • Reactor — can mean: * Bioreactor, any device or system that supports a biologically active environment. * Chemical reactor, a device for containing and controlling a chemical reaction * Nuclear reactor, a device for containing and controlling a nuclear… …   Wikipedia

  • DIII-D (fusion reactor) — DIII D is the name of a tokamak machine developed in the 1980s by General Atomics in San Diego, USA, as part of the ongoing effort to achieve magnetically confined fusion. DIII D pioneered new technology including the use of beams of neutral… …   Wikipedia

  • Fusion power — The Sun is a natural fusion reactor. Fusion power is the power generated by nuclear fusion processes. In fusion reactions two light atomic nuclei fuse together to form a heavier nucleus (in contrast with fission power). In doing so they release a …   Wikipedia

  • Fusion energy gain factor — The fusion energy gain factor, usually expressed with the symbol Q, is the ratio of fusion power produced in a nuclear fusion reactor to the power required to maintain the plasma in steady state.In a fusion power reactor a plasma must be… …   Wikipedia

  • Fusion rocket — A fusion rocket is a theoretical design for a rocket driven by fusion power which could provide efficient and long term acceleration in space without the need to carry a large fuel supply. The design relies on the development of fusion power… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”