Watt, James

born Jan. 19, 1736, Greenock, Renfrewshire, Scot.

died Aug. 25, 1819, Heathfield Hall, near Birmingham, Warwick, Eng.

Scottish engineer and inventor.

Though largely self-taught, he began work early as an instrument maker and later as an engineer on the Forth and Clyde Canal. Watt's major improvement to Thomas Newcomen's steam engine was the use of a separate condenser (1769), which reduced the loss of latent heat and greatly increased its efficiency. With Matthew Boulton he began manufacture of his new engine in 1775. In 1781 he added rotary motion (a so-called sun-and-planet gear) to replace the up-and-down action of the original engine. In 1782 he patented the double-acting engine, in which the piston pushed as well as pulled. This engine required a new method of rigidly connecting the piston to the beam, a problem he solved in 1784 with an arrangement of connected rods that guided the piston rod in a perpendicular motion. His application of the centrifugal governor for automatic control of the speed of the engine (1788) and his invention of a pressure gauge (1790) virtually completed the Watt engine, which had immense consequences for the Industrial Revolution. He introduced the concept of horsepower; the watt, a unit of power, is named for him.

James Watt, oil painting by H. Howard; in the National Portrait Gallery, London.

Courtesy of The National Portrait Gallery, London

* * *

▪ Scottish inventor

Introduction

born Jan. 19, 1736, Greenock, Renfrewshire, Scot.

died Aug. 25, 1819, Heathfield (heat) Hall, near Birmingham, Warwick, Eng.

 Scottish instrument maker and inventor whose steam engine contributed substantially to the Industrial Revolution. He was elected fellow of the Royal Society of London in 1785.

Education and training.

      Watt's father, the treasurer and magistrate of Greenock, ran a successful ship- and house-building business. A delicate child, Watt was taught for a time at home by his mother; later, in grammar school, he learned Latin, Greek, and mathematics. The source for an important part of his education was his father's workshops, where, with his own tools, bench, and forge, he made models (e.g., of cranes and barrel organs) and grew familiar with ships' instruments.

      Deciding at age 17 to be a mathematical-instrument maker, Watt first went to Glasgow, where one of his mother's relatives taught at the university, then, in 1755, to London, where he found a master to train him. Although his health broke down within a year, he had learned enough in that time “to work as well as most journeymen.” Returning to Glasgow, he opened a shop in 1757 at the university and made mathematical instruments (e.g., quadrants, compasses, scales). He met many scientists and became a friend of Joseph Black, who developed the concept of latent heat. In 1764 he married his cousin Margaret Miller, who, before she died nine years later, bore him six children.

The Watt engine.

      While repairing a model Newcomen steam engine in 1764 Watt was impressed by its waste of steam. In May 1765, after wrestling with the problem of improving it, he suddenly came upon a solution—the separate condenser, his first and greatest invention. Watt had realized that the loss of latent heat (the heat involved in changing the state of a substance—e.g., solid or liquid) was the worst defect of the Newcomen engine and that therefore condensation must be effected in a chamber distinct from the cylinder but connected to it. Shortly afterward, he met John Roebuck, the founder of the Carron Works, who urged him to make an engine. He entered into partnership with him in 1768, after having made a small test engine with the help of loans from Joseph Black. The following year Watt took out the famous patent for “A New Invented Method of Lessening the Consumption of Steam and Fuel in Fire Engines.”

      Meanwhile, Watt in 1766 became a land surveyor; for the next eight years he was continuously busy marking out routes for canals in Scotland, work that prevented his making further progress with the steam engine. After Roebuck went bankrupt in 1772, Matthew Boulton (Boulton, Matthew), the manufacturer of the Soho Works in Birmingham, took over a share in Watt's patent. Bored with surveying and with Scotland, Watt immigrated to Birmingham in 1774.

      After Watt's patent was extended by an act of Parliament, he and Boulton in 1775 began a partnership that lasted 25 years. Boulton's financial support made possible rapid progress with the engine. In 1776 two engines were installed, one for pumping water in a Staffordshire colliery, the other for blowing air into the furnaces of John Wilkinson, the famous ironmaster. That year Watt married again—his second wife, Ann MacGregor, bore him two more children.

      During the next five years, until 1781, Watt spent long periods in Cornwall, where he installed and supervised numerous pumping engines for the copper and tin mines, the managers of which wanted to reduce fuel costs. Watt, who was no businessman, was obliged to endure keen bargaining in order to obtain adequate royalties on the new engines. By 1780 he was doing well financially, though Boulton still had problems raising capital. In the following year Boulton, foreseeing a new market in the corn, malt, and cotton mills, urged Watt to invent a rotary motion for the steam engine, to replace the reciprocating action of the original. He did this in 1781 with his so-called sun-and-planet gear, by means of which a shaft produced two revolutions for each cycle of the engine. In 1782, at the height of his inventive powers, he patented the double-acting engine, in which the piston pushed as well as pulled. The engine required a new method of rigidly connecting the piston to the beam. He solved this problem in 1784 with his invention of the parallel motion—an arrangement of connected rods that guided the piston rod in a perpendicular motion—which he described as “one of the most ingenious, simple pieces of mechanism I have contrived.” Four years later his application of the centrifugal governor for automatic control of the speed of the engine, at Boulton's suggestion, and in 1790 his invention of a pressure gauge, virtually completed the Watt engine.

Later years.

      Demands for his engine came quickly from paper mills, flour mills, cotton mills, iron mills, distilleries, and canals and waterworks. By 1790 Watt was a wealthy man, having received £76,000 in royalties on his patents in 11 years. The steam engine did not absorb all his attention, however. He was a member of the Lunar Society in Birmingham, a group of writers and scientists who wished to advance the sciences and the arts. Watt experimented on the strength of materials, and he was often involved in legal proceedings to protect his patents. In 1785 he and Boulton were elected fellows of the Royal Society of London. Watt then began to take holidays, bought an estate at Doldowlod, Radnorshire, and from 1795 onward gradually withdrew from business.

      With the approach of his retirement in 1800 and because that was also the year in which his patents and partnership would expire, Watt established in 1794 the new firm of Boulton & Watt, which built the Soho Foundry to manufacture steam engines more competitively. During this time Watt's son by his first marriage, James, gave him anxiety. A youthful sympathizer with the French Revolution, he had been criticized in Parliament for presenting in 1792 an address from the Manchester Constitutional Society to the Société des Amis de la Constitution in Paris. After being cleared of political suspicion on his return home two years later, however, he and Boulton's son, Matthew, took over the management of the new firm.

      Watt's long retirement was saddened by the deaths of a son by his second marriage, Gregory, and of many of his close friends. Nevertheless, he travelled with his wife to Scotland and to France and Germany when the Peace of Amiens was signed in 1802 and continued to work in the garret of his house, which he had equipped as a workshop. There he invented a sculpturing machine with which he reproduced original busts and figures for his friends. He also acted as consultant to the Glasgow Water Company. His achievements were amply recognized in his lifetime: he was made doctor of laws of the University of Glasgow in 1806 and a foreign associate of the French Academy of Sciences in 1814 and was offered a baronetcy, which he declined.

Peter W. Kingsford

Additional Reading

H.W. Dickinson, James Watt, Craftsman and Engineer (1936), is a scholarly biography with a bibliography and a detailed, illustrated account of all the inventions associated with the steam engine. H.W. Dickinson and H.P. Vowles, James Watt and the Industrial Revolution (1943), places Watt in this historical context.

* * *