pump

pump
pump1
pumpable, adj.pumpless, adj.pumplike, adj.
/pump/, n.
1. an apparatus or machine for raising, driving, exhausting, or compressing fluids or gases by means of a piston, plunger, or set of rotating vanes.
2. Engin., Building Trades. a shore having a jackscrew in its foot for adjusting the length or for bearing more firmly against the structure to be sustained.
3. Biol. an animal organ that propels fluid through the body; heart.
4. Cell Biol. a system that supplies energy for transport against a chemical gradient, as the sodium pump for the transfer of sodium and potassium ions across a cell membrane.
5. prime the pump,
a. to increase government expenditure in an effort to stimulate the economy.
b. to support or promote the operation or improvement of something.
v.t.
6. to raise, drive, etc., with a pump.
7. to free from water or other liquid by means of a pump.
8. to inflate by pumping (often fol. by up): to pump a tire up.
9. to operate or move by an up-and-down or back-and-forth action.
10. to supply with air, as an organ, by means of a pumplike device.
11. to drive, force, etc., as if from a pump: He rapidly pumped a dozen shots into the bull's-eye.
12. to supply or inject as if by using a pump: to pump money into a failing business.
13. to question artfully or persistently to elicit information: to pump someone for confidential information.
14. to elicit (information) by questioning.
v.i.
15. to work a pump; raise or move water, oil, etc., with a pump.
16. to operate as a pump does.
17. to move up and down like a pump handle.
18. to exert oneself in a manner likened to pumping: He pumped away at his homework all evening.
19. to seek to elicit information from a person.
20. to come out in spurts.
21. pump iron. See iron (def. 16).
22. pump up,
a. to inflate.
b. to increase, heighten, or strengthen; put more effort into or emphasis on; intensify: The store has decided to pump up its advertising.
c. to infuse with enthusiasm, competitive spirit, energy, etc.: The contestants were all backstage pumping themselves up for their big moment.
[1400-50; late ME pumpe (n.); c. G Pumpe, D pomp]
pump2
/pump/, n.
1. a lightweight, low-cut shoe without fastenings for women.
2. a slip-on black patent leather shoe for men, for wear with formal dress.
[1720-30; orig. uncert.]

* * *

Machine that uses energy to raise, transport, or compress fluids.

Pumps are classified by how they transfer energy to the fluid. The basic methods are volume displacement, addition of kinetic energy, and use of electromagnetic force. Pumps in which displacement is accomplished mechanically are called positive displacement pumps. Kinetic pumps pass kinetic energy to the fluid by means of a rapidly rotating impeller (blade). To use electromagnetic force, the fluid being pumped must be a good electrical conductor. Pumps used to transport or pressurize gases are called compressors, blowers, or fans.

* * *

Introduction

      a device that expends energy in order to raise, transport, or compress fluids (hydraulics). The earliest pumps were devices for raising water (water-supply system), such as the Persian and Roman waterwheels and the more sophisticated Archimedes screw (q.v.).

      The mining operations of the Middle Ages led to development of the suction (piston) pump, many types of which are described by Georgius Agricola in De re metallica (1556). A suction pump works by atmospheric pressure; when the piston is raised, creating a partial vacuum, atmospheric pressure outside forces water into the cylinder, whence it is permitted to escape by an outlet valve. Atmospheric pressure alone can force water to a maximum height of about 34 feet (10 metres), so the force pump was developed to drain deeper mines. In the force pump the downward stroke of the piston forces water out through a side valve to a height that depends simply on the force applied to the piston.

Classification of pumps.
      Pumps are classified according to the way in which energy is imparted to the fluid. The basic methods are (1) volumetric displacement, (2) addition of kinetic energy, and (3) use of electromagnetic force.

      A fluid can be displaced either mechanically or by the use of another fluid. Kinetic energy may be added to a fluid either by rotating it at high speed or by providing an impulse in the direction of flow. In order to use electromagnetic force, the fluid being pumped must be a good electrical conductor. Pumps used to transport or pressurize gases are called compressors, blowers, or fans. Pumps in which displacement is accomplished mechanically are called positive displacement pumps. Kinetic pumps impart kinetic energy to the fluid by means of a rapidly rotating impeller.

      Broadly speaking, positive displacement pumps move relatively low volumes of fluid at high pressure, and kinetic pumps impel high volumes at low pressure.

      A certain amount of pressure is required to get the fluid to flow into the pump before additional pressure or velocity can be added. If the inlet pressure is too small, cavitation (the formation of a vacuous space in the pump, which is normally occupied by liquid) will occur. Vaporization of liquid in the suction line is a common cause of cavitation. Vapour bubbles carried into the pump with the liquid collapse when they enter a region of higher pressure, resulting in excessive noise, vibration, corrosion, and erosion.

      The important characteristics of a pump are the required inlet pressure, the capacity against a given total head (energy per pound due to pressure, velocity, or elevation), and the percentage efficiency for pumping a particular fluid. Pumping efficiency is much higher for mobile liquids such as water than for viscous fluids such as molasses. Since the viscosity of a liquid normally decreases as the temperature is increased, it is common industrial practice to heat very viscous liquids in order to pump them more efficiently.

Positive displacement pumps.
      Positive displacement pumps, which lift a given volume for each cycle of operation, can be divided into two main classes, reciprocating and rotary. Reciprocating pumps include piston, plunger, and diaphragm types; rotary pumps include gear, lobe, screw, vane, and cam pumps.

      The plunger pump is the oldest type in common use. Piston and plunger pumps consist of a cylinder in which a piston or plunger moves back and forth. In plunger pumps the plunger moves through a stationary packed seal and is pushed into the fluid, while in piston pumps the packed seal is carried on the piston that pushes the fluid out of the cylinder. As the piston moves outward, the volume available in the cylinder increases, and fluid enters through the one-way inlet valve. As the piston moves inward, the volume available in the cylinder decreases, the pressure of the fluid increases, and the fluid is forced out through the outlet valve. The pumping rate varies from zero at the point at which the piston changes direction to a maximum when the piston is approximately halfway through its stroke. The variation in pumping rate can be reduced by using both sides of the piston to pump fluid. Pumps of this type are called double acting. Fluctuations in pumping rate can be further reduced by using more than one cylinder.

      Overall pumping rates of piston pumps may be varied by changing either the reciprocating speed of the piston rod or the stroke length of the piston. The piston may be driven directly by steam, compressed air, or hydraulic oil or through a mechanical linkage or cam that transforms the rotary motion of a drive wheel to a reciprocating motion of the piston rod.

      Piston and plunger pumps are expensive, but they are extremely reliable and durable. Piston pumps are known to have been running without repair or replacement for more than 100 years.

      The action of a diaphragm pump is similar to that of a piston pump in which the piston is replaced by a pulsating flexible diaphragm. This overcomes the disadvantage of having piston packings in contact with the fluid being pumped. As in the case of piston pumps, fluid enters and leaves the pump through check valves. The diaphragm may be actuated mechanically by a piston directly attached to the diaphragm or by a fluid such as compressed air or oil.

      Diaphragm pumps deliver a pulsating output of liquids or gases or a mixture of both. They are useful for pumping liquids that contain solid particles and for pumping expensive, toxic, or corrosive chemicals where leaks through packing cannot be tolerated.

      Diaphragm pumps can be run dry for an extended period of time. Furthermore, the pumping rate of most such pumps can be changed during operation.

 The most common type of gear pump is illustrated in Figure 1—>. One of the gears (gear) is driven and the other runs free. A partial vacuum, created by the unmeshing of the rotating gears, draws fluid into the pump. This fluid is then transferred to the other side of the pump between the rotating gear teeth and the fixed casing. As the rotating gears mesh together, they generate an increase in pressure that forces the fluid into the outlet line. A gear pump can discharge fluid in either direction, depending on the direction of the gear rotation.

 An internal gear pump is shown in Figure 2—>. The driven gear is a rotor with internally cut teeth, which mesh with the teeth of an externally cut idler gear, set off-centre from the rotor. The crescent part of the fixed casing divides the fluid flow between the idler gear and the rotor. Gear pumps can pump liquids containing vapours or gases. Since they depend on the liquid pumped to lubricate the internal moving parts, they are not suitable for pumping gases. They deliver a constant output with negligible pulsations for a given rotor speed. Erosion and corrosion lead to an increase in the amount of liquid slipping back through the pump. Since gear pumps are subject to clogging, they are not suitable for pumping liquids containing solid particles. Since they do not need check valves, however, they can be used to pump very viscous liquids.

      Lobe pumps resemble external gear pumps, but have rotors with two, three, or four lobes in place of gears; the two rotors are both driven. Lobe pumps have a more pulsating output than external gear pumps and are less subject to wear. Lobe-type compressors are also used to pump gases; each rotor has two lobes.

      In a screw pump, a helical screw rotor revolves in a fixed casing that is shaped so that cavities formed at the intake move toward the discharge as the screw rotates. As a cavity forms, a partial vacuum is created, which draws fluid into the pump. This fluid is then transferred to the other side of the pump inside the progressing cavity. The shape of the fixed casing is such that at the discharge end of the pump the cavity closes, generating an increase in pressure that forces the fluid into the outlet line.

      Screw pumps can pump liquids containing vapours or solid particles. They deliver a steady output with negligible pulsations for a given rotor speed. Since screw pumps do not need inlet and outlet check valves, they can be used to pump very viscous liquids. Although screw pumps are bulky, heavy, and expensive, they are robust, slow to wear, and have an exceptionally long life.

 A sliding vane pump is illustrated in Figure 3—>. The rotor is mounted off-centre. Rectangular vanes are positioned at regular intervals around the curved surface of the rotor. Each vane is free to move in a slot. The centrifugal force from rotation throws the vanes outward to form a seal against the fixed casing. As the rotor revolves, a partial vacuum is created at the suction side of the pump, drawing in fluid. This fluid is then transferred to the other side of the pump in the space between the rotor and the fixed casing. At the discharge side, the available volume is decreased, and the resultant increase in pressure forces the fluid into the outlet line; the pumping rate can be varied by changing the degree of eccentricity of the rotor. Vane pumps do not need inlet and outlet check valves; they can pump liquids containing vapours or gases but are not suitable for pumping liquids containing solid particles. Vane-type compressors are used to pump gases.

      Vane pumps deliver a constant output with negligible pulsations for a given rotor speed. They are robust, and their vanes, easily replaced, are self-compensating for wear. Pumping capacity is not affected until the vanes are badly worn.

Kinetic pumps.
      Kinetic pumps can be divided into two classes, centrifugal and regenerative. In kinetic pumps a velocity is imparted to the fluid. Most of this velocity head is then converted to pressure head. Even though the first centrifugal pump was introduced about 1680, kinetic pumps were little used until the 20th century.

 Centrifugal pumps include radial, axial, and mixed flow units. A radial flow pump is commonly referred to as a straight centrifugal pump; the most common type is the volute pump, illustrated in Figure 4—>. Fluid enters the pump near the axis of an impeller rotating at high speed. The fluid is thrown radially outward into the pump casing. A partial vacuum is created that continuously draws more fluid into the pump.

      Volute centrifugal pumps are robust and relatively inexpensive, quiet, and dependable, and their performance is relatively unaffected by corrosion and erosion. They are compact, simple in construction, and do not require inlet and outlet check valves.

      Volute centrifugal pumps can pump liquids containing solid particles, but, when pumping liquids containing more than a small amount of vapour, their suction is broken by cavitation. Volute centrifugal pumps operate best when pumping relatively nonviscous liquids, and their capacity is greatly reduced when used to pump viscous liquids.

      Another type of radial flow centrifugal pump is the diffuser pump, in which, after the fluid has left the impeller, it is passed through a ring of fixed vanes that diffuse the liquid, providing a more controlled flow and a more efficient conversion of velocity head into pressure head.

 In axial flow centrifugal pumps the rotor is a propeller. Fluid flows parallel to the axis as illustrated in Figure 5—>. Diffusion vanes are located in the discharge port of the pump to eliminate the rotational velocity of the fluid imparted by the propeller. Axial flow compressors are also used to pump gases. In mixed flow pumps, fluid is discharged both radially and axially into a volute-type casing.

      A regenerative pump is also called a turbine, or peripheral, pump. The impeller has vanes on both sides of the rim that rotate in a ringlike channel in the pump's casing. The fluid does not discharge freely from the tip of the impeller but is recirculated back to a lower point on the impeller diameter. This recirculation, or regeneration, increases the head developed. Because of close clearances, regenerative pumps cannot be used to pump liquids containing solid particles. They can pump liquids containing vapours and gases, and in fact they can pump gases provided that they contain sufficient liquid to seal the close clearances. Regenerative pumps are suitable only for pumping mobile liquids.

Electromagnetic pumps.
      These can be used only to pump fluids that are good electrical conductors. The pipe carrying the fluid is placed in a magnetic field and a current passed crosswise through the fluid, so that it is subjected to an electromagnetic force in the direction of the flow. The current and the field can be produced in a variety of ways. The principle of the electromagnetic pump is the same as that of the electric motor. Electromagnetic pumps are used for pumping liquid metals, which are used for cooling nuclear reactors.

 Other types of pumps. Gas lifts are used to raise liquids from the bottoms of wells. Compressed gas is introduced into the liquid near the bottom of the well as in Figure 6—>. The resulting mixture of gas and liquid is lighter and more buoyant than the liquid alone so that the mixture rises and is discharged. Gas lifts have no moving parts, and they can be used to pump liquids containing solid particles. Although air, or gas, lifts are now little-used, they were once widely used for pumping water, brine, and oil.

      In the jet ejector pump, fluid passes through a venturi nozzle (see venturi tube) and develops a suction that causes a second stream of fluid to be entrained. In the aspirator pump, water flows through a venturi nozzle and develops a suction for drawing in air. Steam ejectors are widely used for pumping large volumes of vapours and gases at low pressures. Steam at high velocity enters the main body of the pump and transfers some of its momentum to the gas, which is sucked in from the inlet line. A mixture of steam and gas enters the main venturi nozzle known as the diffuser. Kinetic energy is converted to pressure energy, and the mixture of steam and gas is compressed. Thus, energy in the steam is used to compress gas from a low to a higher pressure. Jet ejector pumps have been used since about 1850.

      The hydraulic ram pump uses the energy of a downward-flowing stream of water to lift a proportion of the water to a higher level. Flowing water in the inlet pipe causes a check valve to close. As in a water hammer (in which a flow of water is suddenly stopped, producing a hammering action), kinetic energy (magnetohydrodynamic power generator) is converted to pressure energy, and a second check valve is opened to allow some water into the air chamber and up the discharge pipe. The pressure falls in the inlet water pipe, and the first check valve reopens. The compressed air closes the check valve to the air chamber, and the whole cycle is repeated. Approximately 15 percent of the water flowing in the inlet pipe may be raised to a height of five times the fall in the inlet pipe. Hydraulic ram pumps were developed in the late 18th century and are still used in some domestic water systems.

      Vacuum pumps are simply compressors that take in gas at a pressure lower than atmospheric pressure, compress it, and discharge the gas at atmospheric pressure. Since gas at low pressures has a large volume, vacuum pumps tend to be bulky. Steam jet ejectors are extensively used industrially for creating vacuum. Reciprocating piston and rotary-vane pumps are also widely used for producing vacuum.

* * *


Universalium. 2010.

Игры ⚽ Поможем решить контрольную работу
Synonyms:

Look at other dictionaries:

  • Pump — Pump, n. [Akin to D. pomp, G. pumpe, F. pompe; of unknown origin.] An hydraulic machine, variously constructed, for raising or transferring fluids, consisting essentially of a moving piece or piston working in a hollow cylinder or other cavity,… …   The Collaborative International Dictionary of English

  • Pump It Up — Разработчики Andamiro/F2/Freevolt/Nexcade Издатель …   Википедия

  • Pump It — «Pump It» Сингл The Black Eyed Peas из альбома Monkey Business …   Википедия

  • Pump It Up — Saltar a navegación, búsqueda Una máquina Pump it Up. Pump It Up es una serie de videojuegos arcade de simulación de baile lanzado por Andamiro en 1999. Consta de una máquina con una pantalla, parlantes y luces conectada a un tablero en el suelo …   Wikipedia Español

  • pump — pump1 [pump] n. [ME pumpe < MDu pompe < Sp bomba, prob. of echoic orig.] 1. any of various machines that force a liquid or gas into or through, or draw it out of, something, as by suction or pressure 2. Informal the heart vt. 1. to raise or …   English World dictionary

  • Pump It — Saltar a navegación, búsqueda «Pump It» Sencillo de The Black Eyed Peas del álbum Monkey Business Publicación 2006 Formato CD single, Descarga Digital …   Wikipedia Español

  • pump — pump; pump·abil·i·ty; pump·able; pump·age; pump·er; pump·kin; pump·less; pump·man; cryo·pump; tur·bo·pump; …   English syllables

  • PUMP — Gründung 2002 Genre Hard Rock Website http://www.pump rocks.net Aktuelle Besetzung Gesang Marcus Jürgens Gitarre Aki Reissmann …   Deutsch Wikipedia

  • pump — [pʌmp] verb [transitive] pump money/​millions etc into something FINANCE to put a lot of money into a business, plan etc: • The government has already pumped a huge amount of money into the project. * * * Ⅰ. pump UK US /pʌmp/ verb [I or T] ► …   Financial and business terms

  • Pump — Saltar a navegación, búsqueda Pump Álbum de Aerosmith Publicación 1989 Grabación 1989 …   Wikipedia Español

  • Pump — Pump, v. t. [imp. & p. p. {Pumped} (p[u^]mt; 215); p. pr. & vb. n. {pumping}.] 1. To raise with a pump, as water or other liquid. [1913 Webster] 2. To draw water, or the like, from; to from water by means of a pump; as, they pumped the well dry;… …   The Collaborative International Dictionary of English

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”