fluorine

fluorine
/floor"een, -in, flawr"-, flohr"-/, n. Chem.
the most reactive nonmetallic element, a pale-yellow, corrosive, toxic gas that occurs combined, esp. in fluorite, cryolite, phosphate rock, and other minerals. Symbol: F; at. wt.: 18.9984; at. no.: 9.
[1805-15; FLUOR(IC) + -INE1]

* * *

Nonmetallic chemical element, chemical symbol F, atomic number 9.

The lightest halogen, it is the most reactive element, forming compounds with all others except helium, neon, and argon (the lighter noble gases). Its only valence is 1, in F2 (the diatomic molecule) and fluorides. A toxic, pale yellow gas with a pungent odour, it can be produced only by electrolysis under special conditions. Its chief source is fluorite; it also occurs in cryolite, fluorapatite, seawater, bones, and teeth. Hydrogen fluoride (HF) is a raw material for many other fluorides. Its water solution, hydrofluoric acid, is used to clean metals and to polish, etch, or frost glass. Other fluorides are useful catalysts and raw materials. Sodium fluoride (NaF) is added to water and tin fluoride (SnF2) to dental-care products to reduce dental caries (see fluoridation of water). Fluorocarbons are hydrocarbons in which some hydrogen atoms have been replaced by fluorine atoms; examples include Freons and Teflon.

* * *

Introduction
 most reactive chemical element and the lightest member of the halogen elements (halogen element), or Group 17 (Group VIIa) of the periodic table (periodic law). Its chemical activity can be attributed to its extreme ability to attract electrons (electron) (it is the most electronegative element) and to the small size of its atoms (atom).

History
      The fluorine-containing mineral fluorspar (or fluorite) was described in 1529 by the German physician and mineralogist Georgius Agricola (Agricola, Georgius). It appears likely that crude hydrofluoric acid was first prepared by an unknown English glassworker in 1720. In 1771 the Swedish chemist Carl Wilhelm Scheele (Scheele, Carl Wilhelm) obtained hydrofluoric acid in an impure state by heating fluorspar with concentrated sulfuric acid in a glass retort, which was greatly corroded by the product; as a result, vessels made of metal were used in subsequent experiments with the substance. The nearly anhydrous acid was prepared in 1809, and two years later the French physicist André-Marie Ampère (Ampère, André-Marie) suggested that it was a compound of hydrogen with an unknown element, analogous to chlorine, for which he suggested the name fluorine. Fluorspar was then recognized to be calcium fluoride.

      The isolation of fluorine was for a long time one of the chief unsolved problems in inorganic chemistry (chemistry), and it was not until 1886 that the French chemist Henri Moissan (Moissan, Henri) prepared the element by electrolyzing a solution of potassium hydrogen fluoride in hydrogen fluoride. He received the 1906 Nobel Prize for Chemistry for isolating fluorine. The difficulty in handling the element and its toxic properties contributed to the slow progress in fluorine chemistry. Indeed, up to the time of World War II the element appeared to be a laboratory curiosity. Then, however, the use of uranium hexafluoride in the separation of uranium isotopes (isotope), along with the development of organic fluorine compounds of industrial importance, made fluorine an industrial chemical of considerable use.

Occurrence and distribution
 The fluorine-containing mineral fluorspar ( fluorite, CaF2) has been used for centuries as a flux (cleansing agent) in various metallurgical processes. The name fluorspar is derived from the Latin fluere, “to flow.” The mineral subsequently proved to be a source of the element, which was accordingly named fluorine. The colourless, transparent crystals of fluorspar exhibit a bluish tinge when illuminated, and this property is accordingly known as fluorescence.

      Fluorine is found in nature only in the form of its chemical compounds (chemical compound), except for trace amounts of the free element in fluorspar that has been subjected to radiation from radium. Not a rare element, it makes up about 0.065 percent of Earth's crust. The principal fluorine-containing minerals are (1) fluorspar, deposits of which occur in Illinois, Kentucky, Derbyshire, southern Germany, the south of France, and Russia and the chief source of fluorine, (2) cryolite (Na3AlF6), chiefly from Greenland, (3) fluoroapatite (Ca5[PO4]3[F,Cl]), widely distributed and containing variable amounts of fluorine and chlorine, (4) topaz (Al2SiO4[F,OH]2), the gemstone, and (5) lepidolite, a mica as well as a component of animal bones and teeth.

Physical and chemical properties
      At room temperature fluorine is a faintly yellow gas with an irritating odour. Inhalation of the gas is dangerous. Upon cooling fluorine becomes a yellow liquid. There is only one stable isotope of the element, fluorine-19.

      Because fluorine is the most electronegative (electronegativity) of the elements, atomic groupings rich in fluorine are often negatively charged. Methyl iodide (CH3I) and trifluoroiodomethane (CF3I) have different charge distributions as shown in the following formulas, in which the Greek symbol δ indicates a partial charge:

      The first ionization energy of fluorine is very high (402 kilocalories per mole), giving a standard heat formation for the F+ cation of 420 kilocalories per mole.

      The small size of the fluorine atom makes it possible to pack a relatively large number of fluorine atoms or ions around a given coordination centre (central atom) where it forms many stable complexes—for example, hexafluorosilicate (SiF6)2− and hexafluoroaluminate (AlF6)3−. Fluorine is the most powerfully oxidizing element. No other substance, therefore, is able to oxidize the fluoride anion to the free element, and for this reason the element is not found in the free state in nature. For more than 150 years, all chemical methods had failed to produce the element, success having been achieved only by the use of electrolytic methods. However, in 1986 American chemist Karl O. Christe reported the first chemical preparation of fluorine, where “chemical preparation” means a method that does not use techniques such as electrolysis, photolysis, and discharge or use fluorine itself in the synthesis of any of the starting materials. He used K2MnF6 and antimony pentafluoride (SbF5), both of which can be easily prepared from HF solutions.

      The high oxidizing power of fluorine allows the element to produce the highest oxidation numbers (oxidation number) possible in other elements, and many high oxidation state fluorides of elements are known for which there are no other corresponding halides—e.g., silver difluoride (AgF2), cobalt trifluoride (CoF3), rhenium heptafluoride (ReF7), bromine pentafluoride (BrF5), and iodine heptafluoride (IF7).

      Fluorine (F2), composed of two fluorine atoms (atom), combines with all other elements except helium and neon to form ionic or covalent fluorides. Some metals, such as nickel, are quickly covered by a fluoride layer, which prevents further attack of the metal by the element. Certain dry metals, such as mild steel, copper, aluminum, or Monel (a 66 percent nickel, 31.5 percent copper alloy), are not attacked by fluorine at ordinary temperatures. For work with fluorine at temperatures up to 600 °C (1,100 °F), Monel is suitable; sintered alumina is resistant up to 700 °C (1,300 °F). When lubricants are required, fluorocarbon oils are most suitable. Fluorine reacts violently with organic matter (such as rubber, wood, and cloth), and controlled fluorination of organic compounds by the action of elemental fluorine is only possible if special precautions are taken.

Production and use
      Fluorspar is the most important source of fluorine. In the manufacture of hydrogen fluoride (HF), powdered fluorspar is distilled with concentrated sulfuric acid in a lead or cast-iron (cast iron) apparatus. During the distillation calcium sulfate (CaSO4) is formed, which is insoluble in HF. The hydrogen fluoride is obtained in a fairly anhydrous state by fractional distillation in copper or steel vessels and is stored in steel cylinders. The usual impurities in commercial hydrogen fluoride are sulfurous and sulfuric acids, as well as fluorosilicic acid (H2SiF6), arising from the presence of silica in the fluorspar. Traces of moisture may be removed by electrolysis with platinum electrodes (electrode), treatment with elemental fluorine, or storage over strong Lewis acids (MF5, where M is a metal), which can form nonvolatile (H3O)+ (MF6), salts, as shown by the following equation:

      H2O + SbF5 + HF {long right arrow} (H3O)+ (SbF6).

      Hydrogen fluoride is employed in the preparation of numerous inorganic and organic fluorine compounds of commercial importance—for example, sodium aluminum fluoride (Na3AlF6), used as an electrolyte in the electrolytic smelting of aluminum metal. A solution of hydrogen fluoride gas in water is called hydrofluoric acid, large quantities of which are consumed in industry for cleaning metals and for polishing, frosting, and etching glass.

      The preparation of the free element is carried out by electrolytic procedures in the absence of water. Generally these take the form of electrolysis of a melt of potassium fluoride–hydrogen fluoride (in a ratio of 1 to 2.5–5) at temperatures between 30 and 70 °C (90 and 160 °F) or 80 and 120 °C (180 and 250 °F) or at a temperature of 250 °C (480 °F). During the process the hydrogen fluoride content of the electrolyte is decreased, and the melting point rises; it is therefore necessary to add hydrogen fluoride continuously. In the high-temperature cell the electrolyte is replaced when the melting point rises above 300 °C (570 °F). Fluorine can be safely stored under pressure in cylinders of stainless steel if the valves of the cylinders are free from traces of organic matter.

      The element is used for the preparation of various fluorides, such as chlorine trifluoride (ClF3), sulfur hexafluoride (SF6), or cobalt trifluoride (CoF3). The chlorine and cobalt compounds are important fluorinating agents for organic compounds. (With appropriate precautions, the element itself may be used for the fluorination of organic compounds.) Sulfur hexafluoride is used as a gaseous electrical insulator.

      Elemental fluorine, often diluted with nitrogen, reacts with hydrocarbons (hydrocarbon) to form corresponding fluorocarbons (fluorocarbon) in which some or all hydrogen has been replaced by fluorine. The resulting compounds are usually characterized by great stability, chemical inertness, high electrical resistance, and other valuable physical and chemical properties. This fluorination may be accomplished also by treating organic compounds with cobalt trifluoride (CoF3) or by electrolyzing their solutions in anhydrous hydrogen fluoride. Useful plastics (plastic) with non-sticking qualities, such as polytetrafluoroethylene [(CF2CF2)x]; known by the commercial name Teflon), are readily made from unsaturated fluorocarbons. Organic compounds containing chlorine, bromine, or iodine are fluorinated to produce compounds such as dichlorodifluoromethane (Cl2CF2), the coolant which had been used widely in most household refrigerators and air conditioners. Since chlorofluorocarbons (chlorofluorocarbon), such as dichlorodifluoromethane, play an active role in the depletion of the ozone layer, their manufacture and use have been restricted, and refrigerants containing hydrofluorocarbons are now preferred.

      The element is also used for the preparation of uranium hexafluoride (UF6), utilized in the gaseous diffusion process of separating uranium-235 from uranium-238 for reactor fuel. Hydrogen fluoride and boron trifluoride (BF3) are produced commercially because they are good catalysts for the alkylation reactions used to prepare organic compounds of many kinds. Sodium fluoride is commonly added to drinking water in order to reduce the incidence of dental caries in children. In recent years, the most important application for fluorine compounds is in the pharmaceutical and agriculture fields. Selective fluorine substitution dramatically changes the biological properties of these compounds.

Analysis
      The accurate quantitative determination of the amount of fluorine in compounds is difficult. Free fluorine may be assayed by its oxidizing action on mercury, as shown in

      Hg + F2 → HgF2

      and by measurement of the weight gain of the mercury and the change in the volume of the gas. The principal qualitative tests for the presence of fluoride ions (ion) are (1) liberation of hydrogen fluoride by the action of sulfuric acid, (2) formation of a precipitate of calcium fluoride upon addition of a calcium chloride solution, and (3) decolouration of a yellow solution prepared from titanium tetroxide (TiO4) and hydrogen peroxide in sulfuric acid. Quantitative methods for analyzing fluorine are (1) precipitation of calcium fluoride in the presence of sodium carbonate and treatment of the precipitate with acetic acid, (2) precipitation of lead chlorofluoride by addition of sodium chloride and lead nitrate, and (3) titration (determination of concentration of a dissolved substance) with thorium nitrate (Th[NO3]4) solution using sodium alizarin sulfonate as an indicator, according to the equation

      Covalently bound fluorine—as, for example, in fluorocarbons—is more difficult to analyze and requires fusion with metallic sodium, followed by analysis for the F ion as described above.

atomic number
9
atomic weight
18.9984
melting point
−219.62 °C (−363.32 °F)
boiling point
−188 °C (−306 °F)
density (1 atm, 0 °C or 32 °F)
1.696 g/litre (0.226 ounce/gallon)
oxidation states
−1
electronic config.
1s22s22p5
Karl Christe Stefan Schneider

Additional Reading
The chemistry of fluorine is treated in the following studies: George A. Olah, Richard D. Chambers, and G.K. Surya Prakash (eds.), Synthetic Fluorine Chemistry (1992); and Joseph S. Thrasher and Steven H. Strauss (eds.), Inorganic Fluorine Chemistry (1994).

* * *


Universalium. 2010.

Игры ⚽ Поможем написать курсовую

Look at other dictionaries:

  • Fluorine — Fluorine, la. fluorum, meaning to flow ), is the chemical element with the symbol F and atomic number 9. Atomic fluorine is univalent and is the most chemically reactive and electronegative of all the elements. In its elementally isolated (pure)… …   Wikipedia

  • fluorine — [ flyɔrin ] n. f. • 1833; de fluor ♦ Chim. Fluorure de calcium naturel (cf. Spath fluor). On dit aussi FLUORITE . ● fluorite ou fluorine nom féminin Fluorure naturel de calcium, de formule CaF2, qui cristallise le plus souvent en cubes de teinte… …   Encyclopédie Universelle

  • Fluorine — Flu or*ine (fl[=u] [o^]r*[i^]n or fl[=u] [o^]r*[=e]n; 104), n. [NL. fluorina: cf. G. fluorin, F. fluorine. So called from its occurrence in the mineral fluorite.] (Chem.) A non metallic, gaseous element of atomic number 9, strongly acid or… …   The Collaborative International Dictionary of English

  • fluorine — Symbol: F Atomic number: 9 Atomic weight: 18.9984 A poisonous pale yellow gaseous element belonging to group 17 of the periodic table (The halogens). It is the most chemically reactive and electronegative element. It is highly dangerous, causing… …   Elements of periodic system

  • fluorine — 1813, non metallic element, coined by English chemist Sir Humphry Davy (1778 1829) from fluorspar ( calcium fluoride, modern fluorite), the late 18c. name of the mineral where it was first found; see FLUOR (Cf. fluor) + chemical suffix INE (Cf.… …   Etymology dictionary

  • fluorine — ► NOUN ▪ a poisonous, extremely reactive, pale yellow gaseous chemical element. ORIGIN from fluor (see FLUORSPAR(Cf. ↑F)) …   English terms dictionary

  • fluorine — [flôr′ēn΄, floor′ēn] n. [ FLUOR + INE3] a corrosive, toxic, greenish yellow gaseous chemical element, one of the halogens and the most reactive nonmetallic element, forming fluorides with almost all known elements: symbol, F; at. no., 9: see the… …   English World dictionary

  • Fluorine — Fluorite Catégorie III : halogénures[1] Fluorite sur quartz Le Burg France Muséum de Toulouse …   Wikipédia en Français

  • Fluorine-18 — Infobox isotope background = #eee text color = isotope name = Fluorine 18 isotope filename = alternate names = Fluorine 18 mass number = 18 symbol = F num neutrons = 9 num protons = 9 abundance = Radioisotope halflife = 109.771(20) min decay… …   Wikipedia

  • fluorine-18 — noun An artificial radioactive isotope of fluorine, , having nine protons and nine neutrons, that is an important industrial source of positrons See Also: fluorine 19 …   Wiktionary

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”